- Joined
- May 23, 2020
- Messages
- 2
- Reaction score
- 1
I recently purchased a 100gpd Reef Crest RO unit (locally) which are made by Aquafx and added the Aquatic Life DI Canister to the top, Flush valve and changed the restrictor to a 550ml to reduce waste. I changed the restrictor to a lower thinking this would increase my product water. From the tap I get a lot of pressure and run the unit at 80 PSI, water temperature is 60f right now and tap TDS is about 30 output 0. It takes about 1.5 hours to fill a 5 gallon jug. This was about the same before I changed the restrictor too. Should I not be creating water much faster with 80 PSI even with the cold water? Or am I just asking too much lol.
Main reason I am asking is because I had a 100gpd RO Buddie before with DI. I know it it had a 800ml restrictor and I could produce 5g in about 45 minutes.
Thank you for your help in advance!
Main reason I am asking is because I had a 100gpd RO Buddie before with DI. I know it it had a 800ml restrictor and I could produce 5g in about 45 minutes.
Thank you for your help in advance!