Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
There’s another horizontal canister underneath the di resinI can only see 4 stages. Where is the membrane stage?
The cartridge should be in line with the others and the top bracket you have it on is for the membrane causing the premature wear with the resin. I ran well water with my unit and it lasted quite some time. Here is typical setup:
They have upgrade kits to add another 2 vertical di resin filters to the system, would that solve the problem?Well water can have lots of CO2 it it which uses up di resin. An horizontal resin setup is not very efficient
Oh I see it.There’s another horizontal canister underneath the di resin
The cartridge should be in line with the others and the top bracket you have it on is for the membrane causing the premature wear with the resin. I ran well water with my unit and it lasted quite some time. Here is typical setup:
There is a membrane attached below the di resin, I plan on buying the upgrade kit that adds the double units to the sides of the unit, thank you for the feedbackThe cartridge should be in line with the others and the top bracket you have it on is for the membrane causing the premature wear with the resin. I ran well water with my unit and it lasted quite some time. Here is typical setup:
It didn’t come with a tds meter, but I will be buying an additional 2 di resin stages that includes oneDo you happen to know the TDS of the water entering the DI resin stage?
Would this be what I’m looking forOh I see it.
As stated above, it's unusual to have the DI stage on its side because you don't want water channeling through the resin. It normally would be flowing from bottom to top.
That may explain uneven use of the resin.
Can you just mount the exisiting one vertically?Would this be what I’m looking for
Well waters eats mine up after about 40g or so