I have the sicce syncra sdc 6.0 pump. I had no problems hooking up to wifi when pump was new about a month ago. This week we got a new internet router and I cant reconnect to my new Wifi. How do I do a hard reset on this pump.
Sometimes - a little googling - will help:). There is a manual online - hope this helps:
"
CONTROLLER USE AND PUMPS REGULATION
EN
IT DE
Because the controller keys are capacitive, simply place your finger on the surface and apply a light pressure to use it.
All the LEDs flash simultaneously at the first power-up or after a black out. This means that the controller has not (first
power-up) or has lost (black out) the ECO and PAUSE already made setting, which need to be set up again. Holding down
the ON/OFF button for 4 seconds the LEDs will stop flashing. The flashing ends autonomously when, after a black out, the
WI FI controller reconnects to the network and reloads the pump’s settings done with APP CONTRALL.
· Pump ON/OFF: LONG TOUCH of the central key (Pump ON = 1st LED Blu colour is on)
· When the pump is OFF and then ON again, the pump starts from where it was set up when you stopped it.
· SHORT TOUCH: LOCK/UNLOCK of the keyboard. When you lock it, the symbol LOCK is red.
· To set the pump’s water flow turn clockwise (the flow goes up) and counterclockwise (the flow goes down) with your finger the
“SPEED” area of the controller. The led lights will be on and will follow your finger to indicate where you are with the pump’s regulation.
Wi-Fi Reset: by the LONG TOUCH of both ECO and PAUSE keys the Wi-Fi will be reset. The Wi-FI symbol will remain on NL without flashing. The restore operation will last 11”"
