Siphon issue with Frag tank?

  • Thread starter Thread starter kharn101
  • Start date Start date
  • Tagged users Tagged users None

kharn101

Well-Known Member
View Badges
Joined
May 14, 2007
Messages
900
Reaction score
115
Location
United States
What state or country do you live in
New Jersey
Rating - 100%
2   0   0
Hello All,
I have a reef tank, that is hooked up to a nearby frag tank.
I am noticing, that when i turn the pumps off to do a routine water change for the frag tank i am having a syphon issue.
The frag tank is overflowing faster, then being sent to the main tank. My assumption here is there is an issue with the syphon from my frag tank.
There is no overflow issue at all when the tanks are running, but the moment I shut down a pump there is a syphon issue.
I feel like i need to stick an airline hose into the drain, but look for your guys thoughts here.
IMG_8537.jpg
IMG_8538.jpg
IMG_8536.jpg
IMG_8534.jpg
IMG_8535.jpg IMG_8537.jpg
 
I too have had this happen with my 72 gallons canister filter when the pumps turn off it creates a suction best thing to do is tack the intake out of the water before you turn it off.
 
hey can you explain a bit more, how would I take the intake out? It’s plumbed on. Also the first tank is higher than the sump it is going back into.
 
Having someone stop by, here is what he said. Welcome peoples thoughts as well!

If the drain vent is clear then check the drain pipe going into the actual filter- if you keep the sump water high the pipe entering the filter might need to be cut shorter. (If it’s submerged it takes water pressure to overcome the air pocket inside- which could cause tank to overflow)
 
So the answer was to make the piece going into the sump from the intake shorter. Reduced the amount of air in the system. Worked like a charm!
 

TOP 10 Trending Threads

WHICH TYPE OF MISTAKE TAUGHT YOU YOUR MOST EXPENSIVE REEFKEEPING LESSON?

  • Moving too quickly or adding too much at once

    Votes: 12 34.3%
  • Skipping—or shortening—quarantine or dipping

    Votes: 5 14.3%
  • Buying the wrong equipment the first time

    Votes: 5 14.3%
  • Ignoring maintenance, warning signs, or redundancy

    Votes: 11 31.4%
  • Chasing numbers or making too many changes

    Votes: 3 8.6%
  • Choosing incompatible fish, corals, or invertebrates

    Votes: 5 14.3%
  • Poor aquascaping or tank-design decisions

    Votes: 3 8.6%
  • Failing to research an animal’s needs

    Votes: 1 2.9%
  • Trusting bad advice

    Votes: 4 11.4%
  • Doing something on the tank when you should've gone to bed

    Votes: 5 14.3%
  • Something else—tell us below

    Votes: 4 11.4%
  • I’m still waiting for my first expensive lesson!

    Votes: 3 8.6%
Back
Top
Home
Post thread…
Market
What's new