Skimmer Smell

dagerob

New Member
View Badges
Joined
Sep 9, 2022
Messages
7
Reaction score
7
Location
Austria
Rating - 0%
0   0   0
Hello everyone! I installed a new Red Sea Reefer 250. Everything is going great, but after about one month we started to smell the skimmer, mainly when coming back home. I tried emptying the cup everyday, and adding some activated carbon to the cabinet, but no big change has been felt. I dont know if anyone has faced the same issue, and how you managed to solve it.

Thanks!!
 
if its the gunk, perhaps draining it off with a hose into a small necked container might help, or does your cup offer that option?
Yeah, that is exactly what I have been doing, and it is not much that is being drained actually.

Could it be somwthing related to how old the aquarium is? I did not need to cycle it because it was an upgrade and the rocks and filter media of the old one were all reused (tests were always all good). However, I added some new stones which still need to be properlly covered in coraline etc.
 
What's your filtration before the skimmer, this could be the game changer, socks or roller ? lower the load on the skimmer. If you have an over flow , cut the flow down the emergency drain to a trickle.
 
@ReefEco has a product called the Stink Sink that helps draw the stink out of the skimmer cup.
 
Yeah, that is exactly what I have been doing, and it is not much that is being drained actually.

Could it be somwthing related to how old the aquarium is? I did not need to cycle it because it was an upgrade and the rocks and filter media of the old one were all reused (tests were always all good). However, I added some new stones which still need to be properlly covered in coraline etc.
So, I had the same issue. I had an overflow for skimmate that stunk. The container had a hole in the top to act as a vent (so gasses wouldn't build up). So I ended up getting a small Tupperware container drilled a hole in the bottom, attached it with a small piece of Tubing to the existing hole, filling that little container with activated carbon and drilled a hole in the lid to vent. Worked like a charm. No more stink-a-roo!!!!
 
So, I had the same issue. I had an overflow for skimmate that stunk. The container had a hole in the top to act as a vent (so gasses wouldn't build up). So I ended up getting a small Tupperware container drilled a hole in the bottom, attached it with a small piece of Tubing to the existing hole, filling that little container with activated carbon and drilled a hole in the lid to vent. Worked like a charm. No more stink-a-roo!!!!
Same principle as the Stink Sink sounds like.
 
guess either my home ventilation takes care of the smell or my skimmer over flow cuts its back, only time I catch wind of it is when I clean the cup, and its bad

my overflow
20241227_185929.jpg
 
guess either my home ventilation takes care of the smell or my skimmer over flow cuts its back, only time I catch wind of it is when I clean the cup, and its bad

my overflow
20241227_185929.jpg
Mine only stank when I cleaned the cup.
 

ARE YOU READY TO CONFESS TO CRAZIEST, DUMBEST, FUNNIEST THING YOU’VE EVER DONE IN REEFING?

  • Yeah, I'll confess! (Share your story in the comments!)

    Votes: 44 51.8%
  • Nah, I'll keep mine a secret...(Don't be like that, share with the class!)

    Votes: 41 48.2%
Back
Top
Home
Post thread…
Market
What's new