Suggestions on lighting for SPS dominant setup

RickG

Active Member
View Badges
Joined
Jan 21, 2017
Messages
385
Reaction score
252
Location
Miami
Rating - 0%
0   0   0
So im starting an sps dominant tank. The tank is 95 gallons 40 inches long by 20 wide by 30 tall. I wanted to run two 400 Watt Luxcore selectable ballasts with either radium 20k or hamilton 14k bulbs or two used radions G2 pro. What do you guys think is best for SPS in a 30 inch deep tank. Should i go with 250W or 400W. Hope you guys can help and thanks!
 

Diesel

ME=1, CANCER=0.
View Badges
Joined
Apr 14, 2012
Messages
13,613
Reaction score
16,449
Location
Katy
Rating - 0%
0   0   0
2x 400 watts is a lot for a 95 gallon tank.
IMO if you still have a choice run T5 if it is SPS dominant.
 
OP
OP
RickG

RickG

Active Member
View Badges
Joined
Jan 21, 2017
Messages
385
Reaction score
252
Location
Miami
Rating - 0%
0   0   0
Yea I forgot to mention i am supplementing them with 4 t5 ati bulbs. So what do you guys think 250w instead?
 
OP
OP
RickG

RickG

Active Member
View Badges
Joined
Jan 21, 2017
Messages
385
Reaction score
252
Location
Miami
Rating - 0%
0   0   0
2x 400 watts is a lot for a 95 gallon tank.
IMO if you still have a choice run T5 if it is SPS dominant.

Yea I forgot to mention i am supplementing them with 4 t5 ati bulbs. So what do you guys think 250w instead?
 

Diesel

ME=1, CANCER=0.
View Badges
Joined
Apr 14, 2012
Messages
13,613
Reaction score
16,449
Location
Katy
Rating - 0%
0   0   0
I would go than with the 2 radions LED's you mentioned before.
 
OP
OP
RickG

RickG

Active Member
View Badges
Joined
Jan 21, 2017
Messages
385
Reaction score
252
Location
Miami
Rating - 0%
0   0   0
I would go than with the 2 radions LED's you mentioned before.

they would be used G2s; you think ill still get good par even at that depth?
 

nervousmonkey

LPS Lover, SPS Enabler
View Badges
Joined
Jun 10, 2015
Messages
1,315
Reaction score
1,335
Location
Atlanta, GA
Rating - 0%
0   0   0
I'd go with 250W if you are going to use the T5's. I like the growth with the 14K bulbs. Look into the ReefBrite twinarc bulbs. Dimmable bulbs and ballasts from RB. I'm running that setup on a 135, works great. I like Ben's advice though too. Running an ATI on another setup and both work really well. Just depends on what you know the best IMO, sounds like you know halides.
 

Rick.45cal

2500 Club Member
View Badges
Joined
Jan 14, 2016
Messages
3,693
Reaction score
9,214
Location
Lakeland Florida
Rating - 0%
0   0   0
Get a 6 bulb ATI powermodule, my 27.5" deep tank 27.5" wide tank with and 8 bulb powermodule pumps out 375-385 PAR on the sandbed, and it generates much less heat than metal halides. Definitely a top notch fixture.
 
OP
OP
RickG

RickG

Active Member
View Badges
Joined
Jan 21, 2017
Messages
385
Reaction score
252
Location
Miami
Rating - 0%
0   0   0
Get a 6 bulb ATI powermodule, my 27.5" deep tank 27.5" wide tank with and 8 bulb powermodule pumps out 375-385 PAR on the sandbed, and it generates much less heat than metal halides. Definitely a top notch fixture.


thats pretty good par! im running a 4 bulb ati t5s and idt it would be worth the cash for two extra bulbs. A buddy said he could give me two of his 150 ballasts. What do you guys think of that combo, 4 bulb ati t5s with two 150 mh both running a 14k bulb?
 
OP
OP
RickG

RickG

Active Member
View Badges
Joined
Jan 21, 2017
Messages
385
Reaction score
252
Location
Miami
Rating - 0%
0   0   0
thats pretty good par! im running a 4 bulb ati t5s and idt it would be worth the cash for two extra bulbs. A buddy said he could give me two of his 150 ballasts. What do you guys think of that combo, 4 bulb ati t5s with two 150 mh both running a 14k bulb?

you guys think ill have enough par for sps in 30" tall tank
 

Rick.45cal

2500 Club Member
View Badges
Joined
Jan 14, 2016
Messages
3,693
Reaction score
9,214
Location
Lakeland Florida
Rating - 0%
0   0   0
I honestly don't know. It's hard to say without it all set up and having a PAR meter handy. Maybe someone with a similar set up can chime in. I know the PAR output of the MH's will be dependent on the the ballast used and the bulbs used. There's no escaping the "you get what you pay for" in lighting. MH's waste alot of energy on heat, I used them for many years and loved them but they are very wasteful.
 

Creating a strong bulwark: Did you consider floor support for your reef tank?

  • I put a major focus on floor support.

    Votes: 20 43.5%
  • I put minimal focus on floor support.

    Votes: 11 23.9%
  • I put no focus on floor support.

    Votes: 14 30.4%
  • Other.

    Votes: 1 2.2%
Back
Top