Kevin80
Community Member
Did you ever get to measuring that pH on your tank? I also use a sulfurdenitrator and it works like a charm, but my pH never gets above 8.
Sulfer vs BioPellet Reactors
- Thread starter Andrew Schubert
- Start date
- Tagged users None
Sean Clark
7500 Club Member
I did test the parameters and over time I realized that, due to my setup, I was not able to accuratly measure any difference for pH, CA or Alkalinity.
I do have a second chamber full of calcium reactor media to help buffer up the pH and alk as it is running through it. The water is also recirculating through the reactor. The recirculating design keeps the parameters stable inside the reactor.
I do know that the pH and alk are dropping as nitrate is consumed. However I am not able to measure the difference while it is running.
I can also tell you that without my secondary chamber filled with CA media, the pH and alk are depleted in the effluent.
With the extra media I can not measure a difference with my hobby grade test kits.
The media in my 6 inch diamater secondary chamber has lowered about 3 inches in the last year so I can say that it is working to buffer pH, alk, and to a lesser extent Calcium/magnesium as well.
Blue Spot Octopus
2500 Club Member
- Joined
- Dec 30, 2016
- Messages
- 3,323
- Reaction score
- 1,402
If that is Canadian dollars then that is a reasonable price, Marine Depot was selling theirs for 100 US.
Sean Clark
7500 Club Member
Back when it was even available in the US... RIP Marine Depot.
Sean Clark
7500 Club Member
What are you running your alk at? I never mentioned raising alk to raise pH... within reason.
Kevin80
Community Member
9 dkh. I have my effluent running directly in my skimmer now and it seems to help with the pH.
Similar threads
