Surface agitation Pump

  • Thread starter Thread starter Chrisz
  • Start date Start date
  • Tagged users Tagged users None

Chrisz

Active Member
View Badges
Joined
Dec 20, 2009
Messages
373
Reaction score
104
Location
Duluth, MN
Rating - 0%
0   0   0
What would be the best pump to get to agitate the water surface?

Would the wave pump below work? Don’t want to spend a fortune

IMG_6516.png
 
The Hygger gyre you have pictured would work fine for surface agitation...depending upon tank size. I like gyres as they shoot a flat stream of water across the top of the tank. I have two on the back wall of my 100g DT.
 
What type of tank? AIO sump etc. The one you linked would work as would pretty much any powerhead pointed toward the surface. I have sumps on all of mine and use the return nozzle for surface agitation.
92 gallon corner with sump and skimmer, tank has a full lid to slow evaporation. I’m struggling to keep ph and DKH up though maybe needed more gas exchange?
 

Attachments

  • IMG_6509.jpeg
    IMG_6509.jpeg
    255.2 KB · Views: 91
The lid probably isn't helping with gas exchange. I run 3 tanks all open top and evaporation really isn't that bad
Or at least doesn't seem bad to me but they all have ato units with decent size reservoirs that I only have to fill every 7-10 days.

EDIT : Nice tank!
 
The lid probably isn't helping with gas exchange. I run 3 tanks all open top and evaporation really isn't that bad
Or at least doesn't seem bad to me but they all have ato units with decent size reservoirs that I only have to fill every 7-10 days.

EDIT : Nice tank!
Winter is a killer in Minnesota very dry, I have a very small area for my ATO. I’m using a 5 gallon bucket currently and go through that in 5 days, I don’t even want to entertain what it would be without the glass top and cover on my sump. I might just be stuck with low ph
 
Ya my 180g looses over 2 gallons a day but the sump is in the basement with a wood burner so it's very dry.
Do you run a skimmer? I'm not a pH chaser but tested a few times and found the tank in our bedroom was dropping from 8.3 to 7.8 - 7.9 overnight while we were in the room. I ran an airline into the attic to pull fresh air and pH stays at 8.2 now. Just a suggestion and not an option for everyone.
 
Ya my 180g looses over 2 gallons a day but the sump is in the basement with a wood burner so it's very dry.
Do you run a skimmer? I'm not a pH chaser but tested a few times and found the tank in our bedroom was dropping from 8.3 to 7.8 - 7.9 overnight while we were in the room. I ran an airline into the attic to pull fresh air and pH stays at 8.2 now. Just a suggestion and not an option for everyone.
Yep running a co2 scrubber on the skimmer
 

TOP 10 Trending Threads

WHEN NUISANCE ALGAE OR CYANO FIRST APPEARS, WHAT DO YOU DO FIRST?

  • Manually remove it and observe

    Votes: 8 20.0%
  • Retest nutrients and other parameters

    Votes: 9 22.5%
  • Adjust flow or lighting

    Votes: 1 2.5%
  • Reduce or change feeding

    Votes: 0 0.0%
  • Add or strengthen the cleanup crew

    Votes: 6 15.0%
  • Improve filtration or nutrient export

    Votes: 2 5.0%
  • Use a targeted treatment

    Votes: 0 0.0%
  • Wait and let the tank find its balance

    Votes: 11 27.5%
  • Phone a friend...

    Votes: 0 0.0%
  • It depends (explain in the comments)

    Votes: 3 7.5%
Back
Top
Home
Post thread…
Market
What's new