Surface bubbles? Film bubbles. ?

  • Thread starter Thread starter TxReefer21
  • Start date Start date
  • Tagged users Tagged users None

TxReefer21

Well-Known Member
View Badges
Joined
Jan 17, 2021
Messages
754
Reaction score
416
Location
Dallas, Tx
What state or country do you live in
Texas
Rating - 0%
0   0   0
Running a higher surface flow why do I have the bubbles trapped In corners ?
1D8EDD1C-F18C-426C-B633-DA60A185797F.jpeg
01959203-7987-4172-ABC8-85378BA87DCB.jpeg
 
Take a glass of milk and a straw and blow. Same result? Trapped air
Right. In this case how do I release this trapped air lol how can I break everything up from what I’m already doing
 
Not enough flow to disperse or break the bubbles i would guess so they just getting pushed there then settle is a possibility.
But unsure how long they staying as bubbles?
Got any power heads pointed to surface for surface agitation and to help in gas exchange ?
This is one of the ways to help oxygenate the water ( dissolved oxygen we want) .
Saltwater doesnt hold as much water as freshwater so adding surface agitation or skimmers or any other way is great idea ( especially when worse happens and piece of equipment breaks)

Have you
 
Not enough flow to disperse or break the bubbles i would guess so they just getting pushed there then settle is a possibility.
But unsure how long they staying as bubbles?
Got any power heads pointed to surface for surface agitation and to help in gas exchange ?
This is one of the ways to help oxygenate the water ( dissolved oxygen we want) .
Saltwater doesnt hold as much water as freshwater so adding surface agitation or skimmers or any other way is great idea ( especially when worse happens and piece of equipment breaks)

Have you
I have two up top making great flow
 
Running a higher surface flow why do I have the bubbles trapped In corners ?
1D8EDD1C-F18C-426C-B633-DA60A185797F.jpeg
01959203-7987-4172-ABC8-85378BA87DCB.jpeg
Aw ok just re-read op,so you implemented higher surface flow and now getting more bubbles collecting at corner/s so waves in sea when waves crash down creates bubbles/white water so you have higher surface water breaking/then crashing down and creating bubbles ? If so would need dial back flow a bit ? Or aim flow different part of tank?
 
Aw ok just re-read op,so you implemented higher surface flow and now getting more bubbles collecting at corner/s so waves in sea when waves crash down creates bubbles/white water so you have higher surface water breaking/then crashing down and creating bubbles ? If so would need dial back flow a bit ? Or aim flow different part of tank?
Perfect. I’ll probably move power head lower and the other at the surface still and see how that work maybe to much surface flow lol
 
Still dealing with the same issue I guess my next step is to do a larger water change ? Im running a skimmer HOB cause I don’t have a sump and changed up the flow where it’s not so erratic up top on the surface. Any other ideas. ??
 
Are the bubbles causing any issues? I don't think it's worth too much time/effort to "fix" something that doesn't need to be fixed
 
Are the bubbles causing any issues? I don't think it's worth too much time/effort to "fix" something that doesn't need to be fixed
It’s not so much an issue more of an annoyance knowing it shouldn’t be there
 
They should be there! If salt water didn't hold bubbles like it does, our skimmers wouldn't work. There are many worse problems to have
True. But this isn’t excessive ? They aren’t popping cause of the protein holding them together longer then usual. But i dont know what more to do cause I have all good filtration skimmer is working in order. Only other thing I can think of doing is a larger water change to clean out the water lol i dont know
 

Attachments

  • 832ADFD8-EA52-4870-B7C5-56BFAB039E32.jpeg
    832ADFD8-EA52-4870-B7C5-56BFAB039E32.jpeg
    61.9 KB · Views: 56
True. But this isn’t excessive ? They aren’t popping cause of the protein holding them together longer then usual. But i dont know what more to do cause I have all good filtration skimmer is working in order. Only other thing I can think of doing is a larger water change to clean out the water lol i dont know
Excessive would be the entire surface covered lol If everything else is fine, I wouldn't worry about the bubbles. I have a 10 gallon with 2 clowns and some anemones and it gets bubbles occasionally, they go away eventually (and come back sometimes lol)
 
Excessive would be the entire surface covered lol If everything else is fine, I wouldn't worry about the bubbles. I have a 10 gallon with 2 clowns and some anemones and it gets bubbles occasionally, they go away eventually (and come back sometimes lol)
Okay sounds good! I’ll let it be and hope they just go away on their own. Water column is free of debri and pretty clear Other then the surface where the bubbles are that roam up top and in corners and edges
 
Random flow nozzle on return outlet maybe ?
I think this is what there called but unsure proper name but the nozzles move left to right continously, just remembered someone long ago recommemded one for someone who had alot surface skim and with you saying above the bubbles not popping due to proteins holding them together. Just an idea for you to research to see if it would aid you.
 


Ok here one on sea swirls.and look up " sea squirrels " cant help you no more as getting picked up for transfer to airport in 20 minutes as holiday sadly come to an end (: good luck
 
Random flow nozzle on return outlet maybe ?
I think this is what there called but unsure proper name but the nozzles move left to right continously, just remembered someone long ago recommemded one for someone who had alot surface skim and with you saying above the bubbles not popping due to proteins holding them together. Just an idea for you to research to see if it would aid you.
Well I don’t have a overflow system and return I just have a hob and protein skimmer so I don’t know if I need to increase flow at surface to help break the bubbles or what. Or if I need to just keep water excessively clean. Or just do a big water change
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 26 24.5%
  • I’d trust someone who knows my tank to choose

    Votes: 9 8.5%
  • I’d rather get a gift card and pick it myself

    Votes: 43 40.6%
  • I’d prefer gear or supplies instead

    Votes: 2 1.9%
  • Please don’t surprise me with livestock

    Votes: 26 24.5%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new