So rebuilt and cleaned, my three L2 about two weeks ago and 1 of them just decided tonight to take a crap. Seems to be stopping and starting every few seconds. Took it back out and re-cleaned everything and still doing it. Even tried swapping the controller with the other 2 controllers and still throwing the same error. So it definitely points to the pump side of things Not entirely convinced this pump is bad as clean them every 4 months. Can still feel it humming and trying to engage which it eventually does at time. Decided to ask the Al for fixes out side of the normal cleaning process. And the first thing it threw out was swapping the impeller shift as the magnets overtime can swell despite the shaft looking in pristine condition. Never even knew this was a thing. Learn something new every day if this turns out to be the case. I don’t rally really feel a drag on it but then again we’re talking micrometers. Tomorrow I’m going to try to swap the shaft from one of my other pump to see what happens . But curios if anyone else has ever heard of this with regard to pumps or has ever delt with it personally.
Swollen Impeller ???
- Thread starter Tangdora
- Start date
- Tagged users None
Did you use vinegar during your cleaning process, by any chance?
www.reef2reef.com
Beware of Vinegar - The Pump Killer
I have posted bits and piece of my vinegar story over the past three years, and I thought it would be beneficial if one post contained all that I've learn. You'll be surprised! This story will contain three parts; my history with vinegar, the cause and simplified chemistry what's happening...
www.reef2reef.com
OP
OP
Tangdora
Well-Known Member
- Joined
- Feb 8, 2020
- Messages
- 737
- Reaction score
- 411
In the first year of cleaning mainly used vinegar but for the last two years almost I switched to citric acid.Did you use vinegar during your cleaning process, by any chance?
Beware of Vinegar - The Pump Killer
I have posted bits and piece of my vinegar story over the past three years, and I thought it would be beneficial if one post contained all that I've learn. You'll be surprised! This story will contain three parts; my history with vinegar, the cause and simplified chemistry what's happening...
Well, if it was going to do appreciable damage, it would have been done long ago then!
It’s worth noting that ceramic impeller shafts are actually often finished on a precision grinder, achieving a sub-micron surface flatness! This said, they actually need fairly delicate treatment when out of service! (I looked into cutting my own via wet saw and quickly abandoned that idea!)
It could be worth pulling out the ol’ calipers to determine which part is out of spec?
Similar threads
