the biggest down side to this overflow box is that I have the interior box jammed up as high as possible up against the center brace, and the water line is about 1mm UNDER the trim.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
reasoning?
very nice!Fixed mine too:
dang it John. After reading your posts I realized I glued in my bulkheads wring as well in the overflow box. It didn't leak during my test but I'm not taking any chances. I ordered new bulkheads and unions so I can fix it. It sucks because I was very meticulous and had the plumbing perfect !this makes me feel better. My fiance just yelled out, "y'all both probably didn't read the instructions!" (guilty)
likewise brother. At least it's about a 30 dollar fix for a 200 dollar box! I re-used the bulkheads. Hear me out... I used PVC cutters to cut the PVC as close to the bulkhead as possible, flipped the bulkheads so nownthere is about a half inch of PVC coming out of the bulkhead in the outside box of the overflow, I got new unions and measured how much PVC would be needed to keep my plumbing the same, then got 2 couplings to extend the half inch of PVC inside the box for my emergency and spill over drain. Make sense?**** it John. After reading your posts I realized I glued in my bulkheads wring as well in the overflow box. It didn't leak during my test but I'm not taking any chances. I ordered new bulkheads and unions so I can fix it. It sucks because I was very meticulous and had the plumbing perfect !
anyone have pics of the inside of black box?
What size pvc did you use on inside of black box?
I bought the 16"in box...drilled tank just finishing up the stand.
Not sure how or what to use to complete black box.