The Miracle Tank

[Magellan]

Then you ain’t cooking them right. Slice them up, salt and pepper, roll in egg, then seasoned flour. Fry them puppies up in an iron skillet with some oil. Yumm

@LadyMac I must respectfully disagree!

this is like wrapping a polished turd in bacon. It’s still a turd!

 

[living_tribunal]

@living_tribunal did yours self level? What nap roller? Did yours dry hard or rubbery?

It does self level but you need to make sure to apply enough. I'm sure you could spray it but I just didn't want to get any on the outside of the stand. You obviously have a lot more control with a roller. It dries rubbery hard. If you apply enough it will be rubbery. It's kind of soft.

 

[fishguy242]

not on outside of stand w flex seal under no circumstances ,sorry mho ,no debating ,will regret....

 

[Katrina71]

It does self level but you need to make sure to apply enough. I'm sure you could spray it but I just didn't want to get any on the outside of the stand. You obviously have a lot more control with a roller. It dries rubbery hard. If you apply enough it will be rubbery. It's kind of soft.

Hmm. Can you press a fingernail into it after it's dry?

 

[fishguy242]

Hmm. Can you press a fingernail into it after it's dry?

yes

 

[living_tribunal]

Hmm. Can you press a fingernail into it after it's dry?

It’s not that rubbery but you can faintly feel how it’s malleable.

 

[Katrina71]

not on outside of stand w flex seal under no circumstances ,sorry mho ,no debating ,will regret....

No. Lining the bottom inside. I do pretty finishes. It would be ok without it to be honest.

 

[living_tribunal]

It really just depends how much you put on. If you just want to ensure water doesn’t damage the wood and also that it can even hold water, a few coats will suffice and it won’t be super rubbery.

if you want to apply 10 coats then yes you’d be able to press it with your finger

 

[Katrina71]

It’s not that rubbery but you can faintly feel how it’s malleable.

Ok. That's what I expected.

 

[living_tribunal]

I’m pressing mine now and it’s really not soft like you’re thinking. It is pretty hard if you just do a few coats.

 

[fishguy242]

ok i lost but found on inside ,thought you were talking out side

 

[living_tribunal]

The black interior looks kind of slick as well imo

 

[Katrina71]

Thanks for the pic.

 

[fishguy242]

but if you cut or scrape into to wood will peel off like wallpaper down to primer clean

 

[Katrina71]

but if you cut or scrape into to wood will peel off like wallpaper

Yes. I think I'm going to play with a can to see what I think first.

 

[Katrina71]

I used to finish my dad's boats and planes. I don't want an epoxy for this.

 

[Katrina71]

I've never finished anything that has been compromised yet. Yet.

 

[fishguy242]

Yes. I think I'm going to play with a can to see what I think first.

excellent also auto zone underside rubber spray 10x better than flex

 

[fishguy242]

bye guys/gals will see you late fri early sat,:(have fun

 

[living_tribunal]

Thanks for the pic.

I know I'm not supposed to do that here but thought it might help.