UV plumbing

  • Thread starter Thread starter Jrod381
  • Start date Start date
  • Tagged users Tagged users None

Jrod381

Well-Known Member
View Badges
Joined
Feb 15, 2019
Messages
782
Reaction score
577
What state or country do you live in
Florida
Rating - 0%
0   0   0
Hi all I’m working on plumbing my new build and I’m a little stumped with one part. I am going to have a a manifold and one line will be dedicated to a UV sterilizer with a ball valve to control flow going in. My question is can the UV using barb fittings be plumbed coming from the return líneas the input and one going back to the return line for the output with no issues? If it cannot be plumbed that way does it make sense to have the output of the return line back to the return section of the sump wouldn’t it just keep collecting the same water?
 
hi if i am reading right ,out of manifold back to manifold /no think would be like back pressure,manifold to sump on approx 400 gal assuming,recommend 700gph through uv basically two x the tank per hour no problem in my opinion
happy reefing
ps good uv imo
 
Mines plumbed so flow goes from the manifold and back into the return section but there is enough flow, and it’s running 24/7, you won’t have any issues filtering the same water.

Some may go back through but most will go back to the tank.
 
Mines plumbed so flow goes from the manifold and back into the return section but there is enough flow, and it’s running 24/7, you won’t have any issues filtering the same water.

Some may go back through but most will go back to the tank.
same setup here. no issues
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new