Very beginner question

r2r-gif-welcome.gif
 
Welcome to R2R! How are you testing the salinity??
A Salinity Refractometer & a Hanna Salinity & Temperature Tester. Wanted to have both to learn and compare numbers. Both have been calibrated per manufacturer's instructions and are reading the same.
 
Welcome friend

I'd personally go for 34 or 35. If you choose to run a bit lower, you may have to dose up your main parameters (alk, calc, magnesium) to get them to typical reef levels, depending on your salt mix.

spockwelcome.jpg
 
Welcome friend

I'd personally go for 34 or 35. If you choose to run a bit lower, you may have to dose up your main parameters (alk, calc, magnesium) to get them to typical reef levels, depending on your salt mix.

spockwelcome.jpg
Awesome, thank you. I got it up to 34.5 and based on your's and previous comments I'm thinking I'm good to move forward. Next step is staying consistent when mixing salt without having to add more RODI water here and more salt there.
 
You bet :) I will say most shoot for 1.026 or 35 ppt, but stability is the key. A reef tank that's been run at 1.024 can be just as successful as one ran at 1.026 :)

I would keep it at 24/25 for beginners it's right in the middle and will give you space with any mistakes going over or under.
 

TOP 10 Trending Threads

WHAT’S USUALLY THE FIRST CLUE THAT SOMETHING IS OFF IN YOUR REEF?

  • A fish’s behavior or appetite changes

    Votes: 6 10.7%
  • A coral looks different or stops opening normally

    Votes: 39 69.6%
  • Water clarity or surface appearance changes

    Votes: 7 12.5%
  • Equipment sounds or flow seem different

    Votes: 7 12.5%
  • A test result catches my attention

    Votes: 13 23.2%
  • Algae or other growth starts changing

    Votes: 12 21.4%
  • I usually notice when the problem is already obvious

    Votes: 3 5.4%
  • It depends on what’s going on

    Votes: 9 16.1%
  • Other (Post in the comments)

    Votes: 1 1.8%
Back
Top
Home
Post thread…
Market
What's new