- Joined
- Apr 3, 2019
- Messages
- 437
- Reaction score
- 271
There is a sensor that came with the pump that i installed on the product water line. once the float valve closes and the back pressure hits 40 psi it turns everything off. The waste line is not running everything stops once that float valve closes and the sensor registers the 40psi. What do you suggest I do?? Also how is it possible to keep the RODI running continuously? Water bill would be sky high too lolNice that you have easy access to plumbing and space. A few suggestions...
If you are only using the float valve w/o an ASOV, then you are continuously running waster water so you're water is not actually off. Lastly, if you are only using the float to control on/off, you are not using your RODI to it's best efficiency. They work best when they run continuously and not on/off. With the float valve, you're turning the water on for a few minutes each time at best. If you want to control auto on/off, you can do it with a high and low sensor. Also no need to heat rodi. You can throw that into your SW mixing bucket instead. Coming along!