What’s Your Preferred ATO?

Isn’t that a doser vs being an ato?
Well what is ato? A pump (sometimes a solenoid switch if line is under pressure) and a sensor? Doser is a pump and I have a sensor - its just a setup you get if you have a doser and a sensor and a way to control it?
 
Well what is ato? A pump (sometimes a solenoid switch if line is under pressure) and a sensor? Doser is a pump and I have a sensor - its just a setup you get if you have a doser and a sensor and a way to control it?

ATO = Auto Top Off
Yes, your technically right that an ato and a doser work similarly but they are different and a doser is used for specific regimen.

When just looking to replace evaporation and increasing tank volume of the system as a whole, then an ATO is used. Whereas if you have a pre-buffered solution and possibly micronutrients to add, then a "Doser" becomes the tool of choice for its added program-ability. ATO on the other hand is a simple top off to water level.

~ DrTed Bulkhead
 
ATO = Auto Top Off
Yes, your technically right that an ato and a doser work similarly but they are different and a doser is used for specific regimen.

When just looking to replace evaporation and increasing tank volume of the system as a whole, then an ATO is used. Whereas if you have a pre-buffered solution and possibly micronutrients to add, then a "Doser" becomes the tool of choice for its added program-ability. ATO on the other hand is a simple top off to water level.

~ DrTed Bulkhead
Typically yes, but GHL Doser Maxi as well as some other models are specifically made to perform AWC and ATO. Its in their description.
 
Go figure, i go away for a week and my ATO decides to stop pumping water. From what i can tell, it’s an issue with the float. Atleast this is what i can tell via a facetime call with my mother inlaw. So i ask, what is everyone’s preferred ATO. Looking for something that is very very reliable!
+ one for the Tunze Osmolator 3!! That thing is great!!
 
I’ve heard some complaints about having to replace tunze osmolator sensor yearly. Anyone have experience with this?
 
Go figure, i go away for a week and my ATO decides to stop pumping water. From what i can tell, it’s an issue with the float. Atleast this is what i can tell via a facetime call with my mother inlaw. So i ask, what is everyone’s preferred ATO. Looking for something that is very very reliable!
The easy answer is Tunze.

My answer after switching to Hyrdos is ... Well, Hydros.
 
I’ve heard some complaints about having to replace tunze osmolator sensor yearly. Anyone have experience with this?

I’ve never replaced any parts on any Tunze I’ve ever had. When I sold my old Tunze 3155 it was 7 or 8 years old all original parts and rock solid
 
I’ve heard some complaints about having to replace tunze osmolator sensor yearly. Anyone have experience with this?
Our osmolator 3 sensor quit working at about a year and a half , (and got very hot, which I was told by a rep it could not do) . It was replaced under warranty . Now at two years , (just after the warranty is up ) , the pump has gotten very noisy . Not sure if I should get a new pump or a new ATO . It has always worked really well when it's working though
 
Last edited:
I've been using Tunze ATO systems for five years. I recently upgraded to the Osmolator 3, and that addressed the minor issues I had with the previous generation. I stress those issues where minor.

I love my Tunze ATO!
 
Our osmolator 3 sensor quit working at about a year and a half , (and got very hot, which I was told by a rep it could not do) . It was replaced under warranty . Now at two years , (just after the warranty is up ) , the pump has gotten very noisy . Not sure if I should get a new pump or a new ATO . It has always worked really well when it's working though

The warranty is 5 years on the Osmolator 3
 
Fairly new to the hobby. I use a floater. Replaced the stainless bolt and pin with plastic ones. Been running for 2 years now, I feel an "upgrade" is just asking for more components to potentially fail.
 
I have used the cheap Smart ATO from aliexpress for 2 years, but the pump just give up, so I decided its time for the upgrade, I was about to do it anyway so i ordered a Kamoer one.
 
The warranty is 5 years on the Osmolator 3
Apparently not in Canada . I had to deal with the Canadian distributor and they only offer two years . I don't really understand how they can do this but that's what they told me.
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 5 14.3%
  • Lighting, pumps, or other major equipment

    Votes: 4 11.4%
  • Controllers, testing, dosing, or automation gear

    Votes: 4 11.4%
  • Dry goods and restocks, like salt, media, or food

    Votes: 4 11.4%
  • Corals! Must...Have...CORALS!!!

    Votes: 8 22.9%
  • Fish or other livestock

    Votes: 1 2.9%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 2.9%
  • I’m browsing, but don’t have a specific target

    Votes: 4 11.4%
  • I’m not shopping for reef deals this year

    Votes: 4 11.4%
  • Other (Post in the comments)

    Votes: 1 2.9%
Back
Top
Home
Post thread…
Market
What's new