Who is using hydros to control heaters?

  • Thread starter Thread starter Kershaw
  • Start date Start date
  • Tagged users Tagged users None
I have a WiFi Inkbird. The WiFi allows me to have direct remote access and remote monitoring of temperature. There are two Jagers plugged into the Inkbird, with the Inkbird controlling temp but the thermostat for the heaters acting as backups for the Inkbird. I have two heaters in case one goes out. The Inkbird plugs into a WiFi outlet controlled by a Hydros Control 4. That allows me another layer of redundancy in case either the heaters fail on with neither the Inkbird nor the heaters catching it or fail off, with alerts redundant to the Inkbird alerts. Then, in case all of these redundancies also fail, I have the IBS-M1 WiFi thermometer to completely independently monitor temperatures and alert me if something goes out of whack.

Other than hiring a full time nanny for the fish, I think I have this thing covered.
 
This is one of the concerns I have. My apex when lost WiFi it continues even if WiFi or internet is down with its schedule. That is not the case with hydros correct?
The Hydros continues to work and it doesn't need internet. I even think it may continue to trigger scheduled operations based on my experience with SmartLife devices. However, it can't turn the heater on and off based on temp without a wifi connection as far as I can see.
 
The Hydros continues to work and it doesn't need internet. I even think it may continue to trigger scheduled operations based on my experience with SmartLife devices. However, it can't turn the heater on and off based on temp without a wifi connection as far as I can see.
Based on this information i think best advice would be to use a separate controller in addition to the hydros as others have said above. Thanks again for all the advice everyone shared. Now i just have to decide trident VS alktronic
 
I have my Eheim heater plugged into the Auto Aqua Temp-Security and then that is plugged into one of the WiFi outlets. The Hydros turns the heater on and off as needed. I have my heater turn on at 78.8 and off at 79.3. If the outlet ever gets stuck on the heater thermostat will shut off at 81-82 degrees. If that fails and the heater is stuck on, the Temp-Security will kill the outlet at 84.
 

TOP 10 Trending Threads

WHAT MOST OFTEN MAKES YOU REACH FOR YOUR CAMERA AROUND THE REEF?

  • Coral behavior (feeding, extension, or movement)

    Votes: 1 4.3%
  • New growth or a color change

    Votes: 3 13.0%
  • Unusual fish behavior

    Votes: 0 0.0%
  • The whole tank looking especially good

    Votes: 8 34.8%
  • Something I want to document in case it changes

    Votes: 1 4.3%
  • A funny or unexpected interaction

    Votes: 2 8.7%
  • I usually put the camera/phone down and just watch

    Votes: 4 17.4%
  • Other (Post in the comments)

    Votes: 4 17.4%
Back
Top
Home
Post thread…
Market
What's new