Why do you need a temp controller in your aquarium?

[INKBIRD_official Verified Sponsor]

Repost from @Crabopolis

Protect your aquarium from heater failure!

A quick 60 second review of the Inkbird - ITC-306A Aquarium Heater Temperature Controller. Protect yourself from one of the most common equipment failures in the aquarium hobby.

1. Heater Failure
2. Power Outage
3. Tank Leak

Here is his Instagram Page: https://www.instagram.com/crabopolis/

 

[Peace River]

Thanks for sharing! I use Inkbirds!

 

[BeltedCoyote]

I will be getting one of your units for redundancy with my hydros. Great stuff!

 

[Townes_Van_Camp]

Since you are here and started a thread. Is it I’ll advised to run two heaters on the heating leg, using an outlet splitter? I don’t do this but was curious from a thought that came up in another thread.

 

[Rickybobby]

I’m using an ink bird with two 150 watt heaters. So far so good

 

[KStatefan]

Since you are here and started a thread. Is it I’ll advised to run two heaters on the heating leg, using an outlet splitter? I don’t do this but was curious from a thought that came up in another thread.

As long as you use a qualitity splitter and stay below the max output rating should be fine.

 

[Townes_Van_Camp]

As long as you use a qualitity splitter and stay below the max output rating should be fine.

Fair enough. Goemaw isn’t that what Kstate fans say?

 

[KStatefan]

Fair enough. Goemaw isn’t that what Kstate fans say?

Every Man A Wildcat