diy

Hi everyone, I have an led strip for lighting and I wanted to mount it above my tank. However, I am not looking to drill any holes in the wall (just remodeled the room) and I want to be able to secure it on the rim of my tank. Please send ideas to help me create something like the picture below.

Would like to hear your thoughts on the effects of internal pump vibration on corals. Recently plumbed an external DIY filter using a power head and it caused corals to Immediately close. (Already went through the steps to find the issue) after much experimentation with flow rates, different...

Would like to hear your thoughts on the effects of internal pump vibration on corals. Recently plumbed an external DIY filter using a power head and it caused corals to Immediately close. (Already went through the steps to find the issue) after much experimentation with flow rates, different...

Ok, so I have a tiny 10 gallon aquarium that I previously used for freshwater, but decided that it might make a decent frag tank. My main system is 75 gallons with a 15 gallon sump and my original idea was just to have the 10 next to the 75 with a siphon going from my main tank to the 10 and...

Is epoxy resin safe in our aquariums? Is there a certain brand or type that is safe? I see a lot of cool resin projects done. It would be interesting to know if we could use this inside of our aquariums safely.

Prepare yourself for a rather long first post. This thread is going to document all of the tanks I have in my fish room. Which should be a relatively simple task, but I recently broke my own 2 tank limit. So now there is four of them. I have no idea how this happened. 40 Breeder Display...

I made this for my IM 20 gallon reef tank. All the plumbing is internal besides the incoming and outgoing from the bottom. Comes in from the main recirculating pump in the sump and goes out from the 2 exit ports into the display.

So I decided to redo my tank and it’s plumbing. I also decided I want to make it rimless. So I did. And while I went on a search on the best way to get rid of the silicone residue, I kept reading that it’s not a good idea to do rimless. Kind of too late now.... it’s a standard 55 gallon so the...

Anyone have experience building these? Planning on making a floating island for the fast growing soft corals (GSP and Xenia). I've seen a couple threads but they dont go too far into the setup. From what I have seen you need rare earth magnets. Curious how to make them so they don't scratch...

Made my own floating canopy for above my Nuvo 150. Light just sits on the top. It's bigger than most I've seen. Wanted to make it big enough to cover light spread but also needed it up higher so can access tank.

So I ordered 3 of these off Amazon. They worked well, and I saw many threads about replacing some of the leds with more desirable wavelengths as well as removing the lenses. Well, turns out it looks like they have updated their board and use some sort of LED chip that is attached to the lens. (...

Hey all, figured i’d start a thread and see where it goes. Been in the hobby as a whole for about 5 years now. Had a 40 breeder for about 2 years when i still lived at home. I still miss that tank. Being my first full reef, it taught me everything i know about this hobby, along with a lot of...

I have a water hookup T'd off to two RO systems. I'm looking for help troubleshooting a loud, intermitten vibration problem and advice on how to merge the two systems together, if possible. I suspect they're fighting against each other since they're connected to the same household connection...

So I finally won the rights to a few feet of space in my office lol... wife let me get rid of a piece of furniture. 3 ft tank seemed like a perfect fit so I have been bouncing between ordering a planet cristaline, innovative marine 75 int, reefer 300xl. Still may go that route, but wanted...

What sounds fair to pay for this upgrade? 54 gallon corner Bowfront. Need to: Convert to Reef Ready 1. Add 3/16” black ACRYLIC panel for overflow 2. Drill GLASS twice 1-1/4” bulkheads 3. Run PVC/HOSING for DRAIN/RETURN 4. PAINT side glass panels 5. ADJUST cabinet floor/door to convert for...

Hello guys I have been working on my 120gallon/40breeder sump forquite some time now. finally time to PLUMB and I have a couple questions. Below are pictures of what I drew. I have been thinking about this for 2 days and I think I have FINALLY decided on the design but would love any...

I just started a tank and my return line is dripping at a pretty constant rate and I can’t seem to get it to stop! Any suggestions?

I feel like I’m joining scouts with all the badges out here Here comes my attempt at a build thread.. condensed into a few stages as I’ve sort of already started oops.. Back Story Last year I was a huge freshwater (planted tanks) fanboy but had a spare nano tank lying around so I thought I’d...

Hello peeps, just wanted to get everyones thoughts on this. I have two 32 g brute trashcans that I've drilled holes in for bulkheads, I then bought all the plumbing and a hydor seltz d 1000. I have all the necessary valves, float switch, and BRS RODI system. PS needed this for entry in giveaway.

Overhead of rock work and shows most of coast-to-coast synergy reef v2 16" shadow overflow.

I’m hoping there are some smart electronic engineering people here that might be able to tell me if I need a relay for this level sensor or can I plug it straight in the apex breakout box. If I do need a relay I’ll need help choosing one and setting it up.

Hello everyone, I have a few questions! (TL/DR at bottom) I started my first reef aquarium in a 20G and everything is going great. Got upgradeitis and decided to buy a second hand aquarium and I got everything for really cheap, including the sump, stand, skimmer etc, and everything was up and...

Hey all, I thought I would share a very simple and cheap project I just completed. The total cost for me was $8 as I had most of the parts lying around in my aquarium junk drawer. If you had to buy all the parts, I bet you could do this whole project for about $15-$20 ($30 if you have to buy an...

Hey there Reefers! I see an gap in this market that needs to be filled... affordable mushroom/anemone boxes, baskets, cages or however you want to call it! I’m not knocking those making them but $50 for an acrylic cube is ridiculous. so in my journey for diy ideas I realize there is not much...

Hey guys, so I just wanted to start a thread to document my journey throughout the aquarium fabrication process. I have access to CNC Routing tables which will help with the initial Mock-up when I go to cut it. All of my files are original and completely custom to this tank build. So...