nicrew hyperreef

A Reef Light Shade that stands out with a gloss finish on all 4 sides!! 3DReefing wide shades are customizable to your liking with 4 interchangeable illuminated logo badges. If you prefer not to have any logo and want a blank gloss front side you can do that too! The front and back panel can...

PAR Readings, Mounting Height, and Recommended Settings (Pictures Included Below with Settings) After getting the tank wet and flow stabilized, I wanted to generate accurate PAR data before locking in my lighting schedule. Below are my real-world measurements using an Apogee SQ-420X Smart...

Hey friends, I’m trying to find the best and most cost effective method of mounting two Nicrew 200 gen 2 lights along with two 48 in AI blades and ideally the blades could be tilted. To ether 8020 or to the bar/ hanging kit Nicrew makes. Is this out there I’m just not finding? My sister in law...

So...I finally got the chance to get some PAR readings on the Nicrew HyperReef 200 Gen 2. Shout out and thanks to @pwfess for the Apogee PAR meter rental. The lights are hanging 13 in over the tank. The tank is 54”x26”x22” Hanging Video - Light Unboxing -

I recently took some PAR readings of the Nicrew HyperReef 50W (Generation 1) light. My tank is 15 inches tall, and the light is mounted using the standard bracket that comes with it, placing the fixture about 23 inches above the sand bed. The readings were taken using a Danoplus PAR meter, so...

Hello all, I will be having a mix between the 200 and 150 possibly. I got the 200 to see how it will be around the brace of my tank. Then I’ll decide on 2 more of the 200w or 2 of the 150s or what is needed (7x2x2 tank). on my nano tank I have a 65w Nicrew and am using the preset. What...

Hi, I am seeing if someone can help me when their lifting schedule for the Nicrews Hyper Reef 100w gen 2, I currently am running 2. I do have the controller, now my next question(which may be dumb) do I need to leave the controller connected(plugged in) for the lights to run that schedule...

3 Nicrew gen 2 200w with mounting arm like new condition: 225 each or take all for 650 shipped. I will give a remote control for free if u take them all Radion gen 4 pro mobius ready: 200 each shipped or 350 for both shipped

Hi, looking edge clam for Nicrew hyperreef gen 2 does anyone have one for sale? Or full arm bracket

Hello, I am in the process of setting up a 50 gallon lagoon tank from innovative marine, the dimensions are about 29L, 24 deep, and 17 inches tall. Would a Nicrew HyperReef 200w gen 2 be enough for this tank? Thank you.

I’ve attached a pic and was hoping for some insight in if two of these would be sufficient for a 75 gal tank that is 21 inches deep? Plan on starting with some easier softies and an anemone then moving up to some harder corals once I gain a little more reef knowledge. Thanks guys and gals!

I have the gen 1 150w nicrew led light and the gen 2 150w nicrew left light. I have a hanging kit for my gen 1, just not the gen 2 and I CANNOT find any hanging kits that would be universal. I saw one on Bulk Reef Supply but it isn't compatible with my set up. The gen 1 hanging kit also doesn't...

Okay so, I have 1 nicrew led gen 1 150w light and i wasn't sure if I can use this light and the new gen one at the same time, would it be compatible in the sense of lighting specs? I bought the nicrew in November because I was preparing for the 55 gallon. But they discontinued it. I do not have...

I bought this light for my tank back in november '24. I've been doing research on how to set it up and what not, anyways, I just discovered that the light was discontinued and I'm torn between just buying the 2nd gen or just figuring out how to use it. It's SUPER bright, and I think it might be...

Anyone have any par reading for Nicrew 200 G2? I'm thinking of replacing 3 WEAK XR15 G5 Pro on my 4 ft long tank. Getting garbage par with my XR and getting outperformed by two AI blades.

Hello everyone! New member here. I am at the very beginning stages of a tank upgrade. I have 2, (3) tanks. I started with a 32 gallon biocube. I am big on buying things from other reefers and shopping as local as I can. I decided since I just started this journey I might as well document it and...

Hey everyone, I've been lurking for a while but I finally decided to make an account. I have a Nicrew Hyperreef 100 and I'm desperate for a controller for it. The official controller seems to be unavailable in the UK and I've been searching the Internet for an alternative, I couldn't find...

I have a Biocube 32 that the hood LEDs died in and I decided to scrap the hood entirely and go with a single Nicrew 50W. I’m pretty pleased with the light it gives off but unfortunately now I am faced with mounting issues. The light comes with a standard mounting arm (how nice, I don’t have to...

Hey looking to sell my 2 Nicrew 150w LED’s with a hyper reef controller. Lights have never given me a problem, been in use for a little over a year. Can grow any coral Was used on my first tank as budget lights but I am now getting more into it and purchased some higher end lights Pm me for...

$154 new, selling for $115 shipped to cont US. The price is pretty firm so no low balls or trades. It also comes with a hanging kit as well as a mount. what is included is in the pictures. will only do paypall goods and services

Is anyone able to print the plastic mounting bracket for the mounting arm of a Nicrew? I am unable to find a replacement and this one must have had a defect because it cracked and broke, I have another identical to this that is fine. Please advise if anyone has done this or would be willing...

Hey guys, so I wanted to explore further on lighting and the experience people have had with the Nicrew hyper reef kit. I have been using one for 4 months for my 120 liter aquarium. Having faced a pretty big catastrophe recently with my reef tank, I wanted to understand lighting better to help...

Hello fellow saltines, My tank is a small 5g (16"L x 8"D x 11"H). This is my first tank. No corals yet because the tank is only 1 month old but I'm planning to add some down the road. The stock light most likely won't won't because the tank was made for freshwater so I'm thinking of getting the...