reefpi

I have a new setup running reef pi 6.0 on a pi 3b+ The Heater Threshold field runs my macro which sends an email alert. I get the message when the probe measures higher than the value. And opposite, the chiller threshold is activating when the probe measures a low temperature. The GUI won't let...

I just installed a new setup and I was able to get the dashboard to bootup, but I'm not able to select any pins or drivers for any hardware. I assume this is related to an error I see in the service log which says: driver-subsystem: Failed load raspberry pi driver. Error: can't build hal pin 20...

Source Code and regular build https://github.com/telenkov88/reefrhythm-smartdoser Overview This project aims to provide a highly precise and stable DIY solution for dosing pumps with a user-friendly interface and extensive IoT integration capabilities. It's designed to automate and simplify...

Hi folks. Looking at trying to control an array of 6 xr15 knockoffs, actual brand name was 'intelligent ocean r80. Hoping to do so via pwm from my brand new robotank boards, (printing cases as I type!) I'm from a software background, tiny bit of electronics knowledge but a lot to learn...

Hi guys Is there a list of which smart plugs are supported by the Reef-pi? So far the ones Ive seen mentioned either dont run in 240V and/or just are not a brand available in the UK. Of the ones Ive found mentioned;- - The kasa TPLINK ones I can get but are 110V so no good for me in the UK. -...

The current status can now be found on GitHub You will find an overview of the current status and discussions with links. Also includes comprehensive Links to Sources/Guides, Schematics and Pictures reporting on the progress. I will post progress reports and pictures here as well.

We got my parents old aquarium to give junior a bit of usefull cinema and I get to implement it. I therefore get to play around with technology (especially Reef-Pi) as much as I like ^^ Thought I'd share the project with you and get some usefull input.

since a few weeks im building my own aquarium terrarium. im also using reef pi to control things like humidity and temperature. ill use this thread to keep track of my progress

since a few days im building my own reef pi build for my aquarium + vivarium. everything works fine but I can't get the sensors to show up on the temperature tab. I checked if they show up by typing pi@raspberrypi:~ $ ls /sys/bus/w1/devices/ and the respons shows 2 sensors and the usual bus...

Hello, I would like to share my build and problems with reef-pi, hoping that someone can help me solving. First of all i will explain my setup : Raspberry pi 3 B+ running every function i need on reef pi. I have been trying using many function over the years but the basics I always used is Power...

For anyone interested in using the Kasa smart power strips for their reef, Amzn has them on sale 30% off!

Hey guys I have been stumbling along with this build and have come to a place where I need some advice. I have added the temp probe but the updated UI page is different than the original guide. What do the additional features mean? Or can you point me to a post with the updated information? and...

Hey There Reefers!! I’m making this thread with multiple purposes. The first purpose of this thread is for me to document the evolution of my diy controller, the second purpose is to bring awareness to all the fellow DIYers out there about this awesome product, and third because I think...

Hello Reef2Reef community, This is my first post so please give feedback/forgive my mistakes! I will be posting a build guide in a couple months but I have started to plan out my 93 gallon cube build. I am a computer engineer so I plan to make this a very technical build but I will...

ive combed through threads for hours and im still unsure if the i need to a dac or a special board to dim my mars aqua lights. Im ok with them not turning off completely when dimming and using a outlet to turn them off. its how i have my current reefkeeper setup and i like knowing that they are...

Hello to all you ReefPi builders out there. I am starting my first build and have a few questions that I can't seem to find answers to. Wondering if you can help me out? First, this is actually for a fresh-water planted tank. My goals for this build are the following(ranking is importance to...

Hi All, I am trying to integrate my reef-pi into my new home assistant setup. I only use it currently for turning on/off lights and pumps. can someone help me get this added? I have seen this github.com/sfgabe/home_assistant but am unsure of what to put in the body_on: body_off: and...

Hey all I have this amazing raspery pi controller for the right techie out there. I bought it from a cool company that was trying to bring open source controllers to the market. But not being very tech savvy and new to controllers I never used it. Comes with: head unit 2X temp probes reef...