180 gallon reeftank stand pipe

Rafaelpadro24

Community Member
View Badges
Joined
May 15, 2022
Messages
95
Reaction score
68
Location
Royal Palm Beach
Rating - 0%
0   0   0
Hello, just need some feedback in regards on what should be the height of the stand pipe located in both of my weird in my 180 gallon Glasscages rimless tank. I picked up this unit used and I needed to install new plumbing. Each weir has a 1.50 inch drain pipe and 1 inch supply line. Any feedback is greatly appreciated. Trying to button up this system to get it filled and cycled.

20220802_143718.jpg 20220802_143815.jpg
20220618_071619.jpg
 
If your going full siphon then the lower the better. If your gonna do a durso style drain then you want it a few inches below the water line
 
Unfortunately I can't fit a duorso in the weir between the 1.5 inch drain and 1 supply there is no room for a 1.5 inch duorso. I was looking in using a maggie muffler to silence the drain sound.
 
If it were me I would work towards a full siphon drain.
Unfortunately I can't fit a duorso in the weir between the 1.5 inch drain and 1 supply there is no room for a 1.5 inch duorso. I was looking in using a maggie muffler to silence the drain sound.
What about leaving one standpipe short for the full siphon and in the other overflow, you use a taller standpipe for emergency. Giving you a herbie drain over the combined overflows.
 
thanks for the Bat Signal @Jekyl

@Rafaelpadro24
return looks good. Maybe remove a tooth on the weir for the returns. Someone mentioned a durso for the drains, perfect suggestion. Maggie Muffler is an alternative to the Durso



Let me know if you wanna chat.
 
Unfortunately I can't fit a duorso in the weir between the 1.5 inch drain and 1 supply there is no room for a 1.5 inch duorso. I was looking in using a maggie muffler to silence the drain sound
thanks for the Bat Signal @Jekyl

@Rafaelpadro24
return looks good. Maybe remove a tooth on the weir for the returns. Someone mentioned a durso for the drains, perfect suggestion. Maggie Muffler is an alternative to the Durso



Let me know if you wanna chat.
 
Hi Joe. Thanks,yes I did remove 2 tabs from the black plastic weir cover to allow room for the return line. Looks like I will cut the stand pipe a few inches bellow the weir to allow good flow to my lifereef sump and not over flood it.
 
I’m also looking for a Maggie muffler but they don’t answer their email :(
 
I ended making a couple silencers kinda like the ones from lifereef. Basically they are just a larger diameter pvc pipe just a bit higher than the drain pipe with a cap on it and drill a hole on the cap for venting and on the bottom of the pipe you cut slits to allow water to flow up between the stand pipe and the silencer. I cut mine bellow the weir and painted them black.

20220806_160254.jpg 20220824_114149.jpg
 

TOP 10 Trending Threads

ARE YOU READY TO CONFESS TO CRAZIEST, DUMBEST, FUNNIEST THING YOU’VE EVER DONE IN REEFING?

  • Yeah, I'll confess! (Share your story in the comments!)

    Votes: 33 57.9%
  • Nah, I'll keep mine a secret...(Don't be like that, share with the class!)

    Votes: 24 42.1%
Back
Top
Home
Post thread…
Market
What's new