25mm pump adaptor fits what size PVC?

[Joe13374]

This Fiji pump comes with a 25mm slip fitting. Does that mean it will use a 1/2 inch PVC pipe or a 3/4? Pictures are below. I have an aquatop nano 24 that im upgrading the return pump to a DC. But this Pluming drives me insane.

 

[Peace River]

Many aquarium parts are made in Europe or other parts of the world where they use metric sizing. I believe that 25mm is slightly less than 3/4. You may need an adapter to go from metric to nominal (i.e., North American piping standard) if you choose to hard plumb it. Otherwise you should be able to use one of the barb fittings. Here is a link to an adapter that may work:

https://www.bulkreefsupply.com/metr...6jvJZ7SF8E4aGfxJFQV0BuGYcgZKJn0RoCfogQAvD_BwE
Good luck with whatever direction you decide!

 

[Joe13374]

Many aquarium parts are made in Europe or other parts of the world where they use metric sizing. I believe that 25mm is slightly less than 3/4. You may need an adapter to go from metric to nominal (i.e., North American piping standard) if you choose to hard plumb it. Otherwise you should be able to use one of the barb fittings. Here is a link to an adapter that may work:

https://www.bulkreefsupply.com/metr...6jvJZ7SF8E4aGfxJFQV0BuGYcgZKJn0RoCfogQAvD_BwE
Good luck with whatever direction you decide!

Peace River thank you so much! This was such a huge help, I have been pulling my hair out trying to figure this out. Those adaptors are perfect!