A7/A8 lights

[srobertb]

Any with an A7 or A+7 of A8 or whatever who knows how to reset it? I’ve followed the instructions (chinesenglish) and can’t figure it out.

 

[Gumbies R Us]

Bumping your post for you!

 

[srobertb]

Bumping your post for you!

Thanks. I actually kind of figured it out. The answer was: The lights are super screwy and it took 45 minutes repeating the same step over and over again:

Turn intensity to 0. Turn intensity up a tick and wait 3 seconds. Turn it down. Wait 3 seconds. Turn it up. Wait 3 seconds. Continue doing this and slowly increase the amount you turn the intensity knob up after 4 times until the light flashes R/G/B and then it is reset.

 

[dddougal]

how do you find the a7 lights, im about to buy a couple

 

[OscarHaglund]

Thanks. I actually kind of figured it out. The answer was: The lights are super screwy and it took 45 minutes repeating the same step over and over again:

Turn intensity to 0. Turn intensity up a tick and wait 3 seconds. Turn it down. Wait 3 seconds. Turn it up. Wait 3 seconds. Continue doing this and slowly increase the amount you turn the intensity knob up after 4 times until the light flashes R/G/B and then it is reset.

Thank you for this. I tried doing this by removing power but never realized i should have been rotating the knob instead

 

[js-3Design]

anyone wondering, there is a small button you can push thru the housing, that is an instant factory reset

 

[js-3Design]