Abyzz Pump with Apex Control

[psumms]

Hi all, i've just added an Abyzz Apex 0-10v port controller - Working great, however... Testing what happens if the connect between pump and Apex is lost... the pump shuts down! Is there a way to add a 'Fallback' to a 0-10v controlled device? Alternatively, possible to set a fallback on the Abyzz controller? I can't see anything can be controlled on the Abyzz box once it detects the external interface controller. Have Googled but can't find anything regarding this.

 

[BZOFIQ]

Not aware of anything build in and same happens with Tunze when set to be controlled via 0-10V.

I'm working on a solution for both my Tunzees and the Abyzz on the new build with a relay to provide alternate source of voltage so that in the event of failure it could switch to say 1.5V provided by AA and work at 15% or something like 18650 and work at ~40%.

That said, nothing to report yet as I dont have a complete prototype and have been swamped.

 

[BZOFIQ]

Perhaps someone has a way around it.