Adding an RO booster pump

  • Thread starter Thread starter saltyhog
  • Start date Start date
  • Tagged users Tagged users None

saltyhog

blowing bubbles somewhere
View Badges
Joined
Jan 2, 2014
Messages
9,413
Reaction score
15,940
Location
Conway, Arkansas
What state or country do you live in
Arkansas
Rating - 0%
0   0   0
My current RO/DI set up is a 6 stage BRS set up and my pressure is chronically less than 40psi so I would like to add a booster pump. My RO/DI reservoir is quite a ways from my unit and I have a float valve in it to shut off production when it's full. If I add the booster pump where do I put the pressure cut off valve? If I don't use the valve will the pump run continuously even when the reservoir is full?
 
You put the valve on the exit of the last stage. when it hits the pressure it kills the pump
 
i recommend the aquatic life smart buddie pump. costs about the same as other pumps but is more plug and play.
 
Btw the float valve doesn’t work well as a pump shut off. Definitely have one, but as a back up. Alone, it will cycle on and off. The float valve will eventually lose pressure and turn back on. it will do this over and over.
 
If you're talking about the Aquatec booster pump setup, it's not a valve, it's a pressure activated electrical switch. It will not shut water off at all, only turn off the pump.
And yes, without this switch the pump will just be on all the time.
 
You put the valve on the exit of the last stage. when it hits the pressure it kills the pump

So anywhere on the line leading out of the DI to the reservoir?

If you're talking about the Aquatec booster pump setup, it's not a valve, it's a pressure activated electrical switch. It will not shut water off at all, only turn off the pump.
And yes, without this switch the pump will just be on all the time.

Correct(sorry for the misstatement, a pressure activated switch that shuts off of the pump. Can I put it just after the line leaves the DI?

Thanks guys.
 
The one I have is set to 40 psi. I tried adjusting it once but it didn't seem to make a difference, and I didn't want to keep turning the little set screw. It also feeds my fridge water, it would be nice to get 75 psi there.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new