Ai prime on fluval flex 32

[Isiah1820]

I have a fluval flex 32G tank the dimension are 32.5 x 15.35 x 15.75". Would I benefit from having a second prime light? I noticed the corners are kinda dark and I don’t want to be stuck with only putting corals in the middle. Also is the depth of the the ok to put corals lower or on the sand bed?

 

[X-37B]

Yea you can add another 16hd.
On my 18" 20g nano cube I run 2 and grow acros on the bottom.
Tank just turned 7 months.

 

[Isiah1820]

Beautiful tank. I’m about a month and a half in. And ok cool I just order it. Would I have to light acclimated since it will double the output when I add another?

 

[X-37B]

Beautiful tank. I’m about a month and a half in. And ok cool I just order it. Would I have to light acclimated since it will double the output when I add another?

Always a good idea. What is your current setting?

 

[Isiah1820]

I use one of the presets from their website.

 

[X-37B]

I use one of the presets from their website.

Thats a pretty week setting so I dont think you will shock anything when you add #2.

 

[Isiah1820]

I was thinking that idk if it’s showing those levels for 8pm or that’s the highest it’s set. Like I said I used the pre program maybe I did it wrong. Can you post a screenshot of your settings ?

 

[X-37B]

Mine is for an acro dominant system.

 

[Isiah1820]

Any pointers for my settings? I’m running a mixed reef. Also have some nems.

 

[X-37B]

Any pointers for my settings? I’m running a mixed reef. Also have some nems.

I would drop the first 4, on my settings, to 80% and keep the others the same. This should be a decent starting point.
1hr ramp up/down and 10hrs at peak.
You can then adjust the first 4 up over time if needed.

 

[X-37B]

Just go in and setup your own schedule. I do have one 16hd, running the same setting in my 30g remote fuge. Currently no macro as its all in my 45's sump now.
With that said I picked up a anemome for my clown pair.
The anemone likes my original settings.

 

[Isiah1820]

Got the other light on. Should I bring them down or is that low enough.

 

[X-37B]

I run mine at 10" off the waters surface.