Anyone DIY a no water change substrate vac?

MarshallB

Active Member
View Badges
Joined
Dec 29, 2019
Messages
439
Reaction score
574
What state or country do you live in
Oklahoma
Rating - 0%
0   0   0
Since I have automatic water changes set up, the water it takes to vaccum out the sand seems like such a waste. Plus I have to make sure I have enough mixed salt water ready to replace what im going to suck up. If I don't then I have to wait 24 hours. Simply put, it's a hassle. Seems like a no waste water vac would be key in the situation. I'm sure someone has made one, has anyone on here?

I'm sure we've all see those cheap electric gravel vacs on Amazon. Those seem very underpowered and more like a gimmic. I'm sure they would do OK for a goldfish tank or something.

I was thinking something more along the lines of buying a cheap pump off amazon, connecting a siphon vac to the intake and inserting some filter pads or a catch chamber somewhere along the line. Or maybe throw a filter sock on the return section of the pump.

Figured I'd ask before I start building one from scratch.
 
Just siphon into a large 5 micron bag that drains into your sump or a bucket. sump would be best for continuous siphoning. just watch your water levels in the sump so you don't overflow it.

5 micron filter bag
 
I started doing this by siphoning into a filter sock in the sump as mentioned above. Worked great.
 
I have 12V diaphragm pump based vac that i use to clean my pico and nano. I basically sucks water and runs it through a canister filter cartridge before pushing it back in the tank. I have also attached a slightly slanted 1/2" rigid clear acrylic tubing for convenience. If you want i can post a pic tomorrow.
 
I use a cheap canister filter with all the baskets and sponges taken out and filled tightly with floss, once done just empty the filter and replace with fresh floss for next time.
 
Maybe it was brs, but I believe I seen someone use a single reverse osmosis canister with a sediment filter in it. A vacuum and pump on one side to suck up the Dirt, and the other side was the water return into the tank.
 
These are all great ideas. Im not sure why i never thought about just running the siphon hose into a filter sock. I'm pretty sure i have a old canister filter somewhere for my fresh water tanks. Good Ideas!
 

TOP 10 Trending Threads

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 12 18.2%
  • Powerheads or wavemakers

    Votes: 5 7.6%
  • Sump or rear filtration chambers

    Votes: 9 13.6%
  • Skimmer or other filtration equipment

    Votes: 9 13.6%
  • Overflow or plumbing

    Votes: 12 18.2%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 18 27.3%
  • Other—tell us what I missed

    Votes: 1 1.5%
Back
Top
Home
Post thread…
Market
What's new