Anyone using Dr. Sochting's Oxydator

  • Thread starter Thread starter PapaDragon
  • Start date Start date
  • Tagged users Tagged users None
2 Years running with them here. 2-A Types w/ 6% and 2-catalysts (125G total volume)

I have not seen any negatives.
 
I'll add one more note about anemones... I've got at least 50 in my system and have never noticed any ill effects. As another poster mentioned, it's not the same as dropping hydrogen peroxide directly into the system.
 
What % of peroxide do I need? I can find only 3% here in Canada...
 
I found 34% peroxide. How to delute it to 12 or 6%?
 
Just ordered mine, can't wait to see how it works.

does it have any effect onpH?
 
Is OK to use one Söchting Oxydator A for 90G (+20G in sump)?
Yes it is. However, depending on stocking levels I would go with 9% peroxide and 2 catalysts at first before trying 12% but as said ait depends on stocking and amount you feed and how often.
 
I found 34% peroxide. How to delute it to 12 or 6%?

Well if you dilute it 1 part peroxide (34%) - and 2 parts water/RODI - you will get 11.3333 percent (close enough to 12 in my book). If you take 1 part of the new 11.3333 percent solution and add 1 part water/RODI you will get about 6 percent
 
Hi all, I just added a kalk stirrer to my system. I also just ordered a size "A" oxydator. The tank is currently a 55 dt with a 30 gallon sump. I will be using it in this tank short term and transferring everything to a 50 cube with a fiji 20 sump. My question is, are there any known issues with running the oxydator while dosing kalk with the stirrer? Also, do you think it will be too big for the 50 cube? What % peroxide should I be using and how many catalyst do you suggest? Sorry for all the questions, I just want to get it right. Thanks!
 
Hi all, I just added a kalk stirrer to my system. I also just ordered a size "A" oxydator. The tank is currently a 55 dt with a 30 gallon sump. I will be using it in this tank short term and transferring everything to a 50 cube with a fiji 20 sump. My question is, are there any known issues with running the oxydator while dosing kalk with the stirrer? Also, do you think it will be too big for the 50 cube? What % peroxide should I be using and how many catalyst do you suggest? Sorry for all the questions, I just want to get it right. Thanks!
An Oxydator will not interfere with your kalk dosing nor will.it have a direct impact on PH.
Regarding the use zbd % of peroxide and number of catalysts. You will be running 70g? In a well stocked tankwuth fish and feeding at least twice a day then 9% with 2 catalysts should be fine. If you feed a lot you may even go to 12% peroxide but start with 9% and 2 catalysts as above.
 

TOP 10 Trending Threads

IF ONE SYSTEM FAILED WHILE YOU WERE AWAY, WHICH WOULD WORRY YOU MOST?

  • Power or backup power

    Votes: 16 32.0%
  • Heating or cooling

    Votes: 2 4.0%
  • Auto top-off

    Votes: 3 6.0%
  • Return pump or water circulation

    Votes: 4 8.0%
  • Dosing or automated testing

    Votes: 0 0.0%
  • Plumbing, overflow, or leaks

    Votes: 5 10.0%
  • Tank sitter or remote monitoring

    Votes: 3 6.0%
  • Electrical failure of some sort

    Votes: 1 2.0%
  • Seam or structure failure

    Votes: 13 26.0%
  • Something else (tell us in the comments)

    Votes: 3 6.0%
Back
Top
Home
Post thread…
Market
What's new