Aquascape Feedback

[Kwonny]

I made this for my Biocube 32. Never done this before. Im pretty happy. Thoughts? Still needs mortar.

 

[kevgib67]

I made this for my Biocube 32. Never done this before. Im pretty happy. Thoughts? Still needs mortar.

Looks awesome, just make sure there’s enough room between the rock and glass for cleaning on the left and right.

 

[Kwonny]

Looks awesome, just make sure there’s enough room between the rock and glass for cleaning on the left and right.

Thank you. I used the pipe as the buffer so the closest it will be to the glass is .75 inches. Thats only at the closest point almost all is a minimum 1 inch off the glass or more. The outside of the pipe is where the glass is. If that mskes sense lol.

 

[Michael Hughes]

Looks awesome, just make sure there’s enough room between the rock and glass for cleaning on the left and right.

^ This!

I found 3" off the glass wasn't quite enough for me. I prefer using a disposable handheld razor blade to clean the class, and I tend to bump or knock over any rocks less than about 4" from the glass, especially close to the bottom.

 

[Fish Fan]

I think it looks very good, but I'd be cautious about how much straight up and down vertical you have. I'd want it more slopped myself, to avoid dark, shaded areas.

 

[Kwonny]

I think it looks very good, but I'd be cautious about how much straight up and down vertical you have. I'd want it more slopped myself, to avoid dark, shaded areas.

That was my only concern. Im hoping the light makes it to those parts. We will see. It will be back of the display so im hoping the front lights get to it.

 

[Kwonny]

I think it looks very good, but I'd be cautious about how much straight up and down vertical you have. I'd want it more slopped myself, to avoid dark, shaded areas.

That was my only concern. Im hoping the light makes to those parts. We will see. It will be back of the display so im hoping the front lights get to it.

I think it looks very good, but I'd be cautious about how much straight up and down vertical you have. I'd want it more slopped myself, to avoid dark, shaded areas.

The lights on the stock hood are pretty near the front looking at them now. I feel better. Also im going to have softies and easy LPS that dont require too much light. Still want the lights to hit it though.

 

[Fish Fan]

That was my only concern. Im hoping the light makes it to those parts. We will see. It will be back of the display so im hoping the front lights get to it.

I think you might do better with a bot more of a sloped stack, that will give you more real estate to place corals. If you place a coral at the top of a vertical cliff, it will shade all underneath.

 

[The Farmer]

I would remove half of 1 side and lean both together, you would still have the cave and it would be a little shorter for vertical coral growth.

 

[Kwonny]

Its unfortunately already glued. Lol.

 

[Kwonny]

I would remove half of 1 side and lean both together, you would still have the cave and it would be a little shorter for vertical coral growth.

I did make sure that its under 2/3rds height of the water in tank