Jody Owens
Active Member
- Joined
- Aug 11, 2023
- Messages
- 221
- Reaction score
- 52
- Location
- Kansas City
- What state or country do you live in
- Missouri
I have everything installed according to all the instructions I could find online. I am using a booster pump, pressure switch and the auto flush kit on a Air, Water and Ice Neptune system. Here is a breakdown of how everything is setup:
Electrical:
Aquatec Power Supply -> Pressure Switch Y -> Y that goes to the Auto Flush and Pump
Plumbing:
Water Source -> Booster Pump -> 75 PSI flow restrictor to make sure that it doesn't spike above -> RO Unit (Waste water connects to the auto flush) -> DI Portion -> Pressure Switch -> Float Valve
It produces what okay, but the auto flush seems to either be running constantly or making a lot of noise. I am not sure if I have something connected incorrectly.
Electrical:
Aquatec Power Supply -> Pressure Switch Y -> Y that goes to the Auto Flush and Pump
Plumbing:
Water Source -> Booster Pump -> 75 PSI flow restrictor to make sure that it doesn't spike above -> RO Unit (Waste water connects to the auto flush) -> DI Portion -> Pressure Switch -> Float Valve
It produces what okay, but the auto flush seems to either be running constantly or making a lot of noise. I am not sure if I have something connected incorrectly.
