Aquatic Life RO Buddie

[darnoc23]

Hi,

Anyone use the Aquatic Life RO Buddie 4 stage? Wandering how often do you guys change the DI filter. I just installed mine about a month ago and was only able to use 80 gallons and need to change the DI filter. TIA.

 

[glb]

I used to have this unit. IMO it’s better for a smaller tank because of its size. Also, does your water source have a high TDS? That could be part of the problem if you’re running through resin too fast. I replaced mine with a BRS unit that has a flush valve, which allows you to bypass the DI filter and run the unit for a few minutes to take care of TDS creep. I’ve been really happy with it. Hope this helps!

 

[blaxsun]

I use the Twist-In 4-stage, but same idea. You should get a lot more use with your DI resin, but it also depends on water quality, if you flushed the cartridges/membrane after installation (and when switching out), etc.

 

[darnoc23]

I used to have this unit. IMO it’s better for a smaller tank because of its size. Also, does your water source have a high TDS? That could be part of the problem if you’re running through resin too fast. I replaced mine with a BRS unit that has a flush valve, which allows you to bypass the DI filter and run the unit for a few minutes to take care of TDS creep. I’ve been really happy with it. Hope this helps!

Thank you! My source water reads 200 TDS. I have it in my backyard and leave it there. Does leaving it outside have a factor on the DI?

 

[Lbrdsoxfan]

High temps can cause issues with the ro membrane.

 

[glb]

Thank you! My source water reads 200 TDS. I have it in my backyard and leave it there. Does leaving it outside have a factor on the DI?

That’s pretty high TDS. and agree that heat can affect it. Any chance you could move it