ATI Straton Clone - Kassray Line

[coker98]

How is the app on these once you change the language settings and connect the wi fi? Does the app have default profiles for SPS and is easy to customize schedules?

The app is a little clunky but manageable. Ive used the first gen reefbreeders lights and they are almost identical. They have preloaded spectrums but I havent tried them. I just built my own based off the mobius spectrums I used for my radions. Spectrum matches but the coverage makes everything light up even more.

As far as configuration, you just have to go hour by hour and adjust the settings then save your profile.

 

[fishface NJ]

I am very happy with the spectrum. The corals havent skipped a beat and have had positive responses to these lights. The coverage is insane! Im currently running them at 40 percent but may need to back the down to 30-35 percent.

Can you post a photo of your tank with lights? What type of corals do you have?

 

[coker98]

I am very happy with the spectrum. The corals havent skipped a beat and have had positive responses to these lights. The coverage is insane! Im currently running them at 40 percent but may need to back the down to 30-35 percent.

Can you post a photo of your tank with lights? What type of corals do you have?

I have mixed corals. SPS upper half and softies and LPS lower half.

 

[anthonyt987]

I have mixed corals. SPS upper half and softies and LPS lower half.

any other updates on these? was planning on getting some

 

[coker98]

I have mixed corals. SPS upper half and softies and LPS lower half.

any other updates on these? was planning on getting some

So far so good.

I had to turn the intensity down to 35 percent.

 

[anthonyt987]

So far so good.

I had to turn the intensity down to 35 percent.

is the app/software as finicky as everyone says?

 

[ironreef]

I am considering a pair of Kassray T60's over my 3ft 21 gallon tank. Might be able to get them shipped for $300. I currently run AIPAI A7 III's over my tank which are Kessil A360x clones. How do you like the light output on yours so far in terms of power, customization, and looks?

 

[krak256]

The sunrise/sunset controls are first gen reefbreeder-esk style inputs. Basically you go hour by hour and configure your channels.

Oof, that is painful. I had reefbreeders and hated that. Sometimes settings would reset and having to manually update each channel by each hour was the worst.

 

[ajremington68]

So far so good.

I had to turn the intensity down to 35 percent.

Do you know how much par you are at at your rocks and sandbed? Also how far above the water is the lights mounted?

 

[ajremington68]

As expected the one challenge is the app that supports the device is only in Chinese. I was nonetheless able to download the app from the Apple App Store, connect to the light via Bluetooth, and connect the light to my WiFi network. I will use a translator app to do the lighting schedule setup later.

Below are pictures from the app.

Hey, hopefully you see this, but did your light immediately connect to your Wi-Fi? I ask because mine is not and telling me my wifi name or password is incorrect... But both are the correct ones on the screen. Not sure if you have to use IP or if there is a special way to do this. Thanks!

 

[coker98]

You just have to follow the pic instruction earlier in this thread to get to language settings and change it.

 

[coker98]

As expected the one challenge is the app that supports the device is only in Chinese. I was nonetheless able to download the app from the Apple App Store, connect to the light via Bluetooth, and connect the light to my WiFi network. I will use a translator app to do the lighting schedule setup later.

Below are pictures from the app.

Hey, hopefully you see this, but did your light immediately connect to your Wi-Fi? I ask because mine is not and telling me my wifi name or password is incorrect... But both are the correct ones on the screen. Not sure if you have to use IP or if there is a special way to do this. Thanks!

Reset all network devices. Mine connected with no issues.

Also check if your routing is 5Ghz. If it is, disable it and only run 2.4Ghz until the lights are connected.

If I remember correctly, they can’t connect to 5Ghz.

 

[coker98]

The sunrise/sunset controls are first gen reefbreeder-esk style inputs. Basically you go hour by hour and configure your channels.

Oof, that is painful. I had reefbreeders and hated that. Sometimes settings would reset and having to manually update each channel by each hour was the worst.

You do have the option to save your settings. I mess with my lights all the time and when I’m done I just revert back to the saved settings.

 

[ajremington68]

@coker98 I had the app but it wouldnt connect and i was in 2.5Ghz. Turns out your wifi cant have "&" in the name... My Wifi was "Plants&Reefs" it is not "PlantsAndReefs" works not and I connected. Any chance you have a light profile you can share a QR code so I can use and twist it into my own?