AWC with DOS - is this correct?

[Zero_Cool]

I just got around to starting the AWC on the tank using a DOS. Set up in the tasks seemed really too easy so I am not sure if I have it correct.

I set it for 1.5 gallon (5678 mL) over a 24 hour period:

However when I go into the DOS itself the Fill and Draw are only listes at 2000 mL:

Is this because of the time of day or do I have something wrong?

 

[CasperOe]

Looks right to me! :D If you follow the task setup, it's hard do to it wrong.. I am changing 50 l over 24 hours and the pump is changing in intervals of about 385 ml. before switching off..

 

[Zero_Cool]

Thank you

 

[A_Blind_Reefer]

I can’t see the pics but you stated fill and draw and 2000ml. This leads me to believe you’re somehow looking at the ddr tile graph data which I don’t think you should be able to see unless you’re running the ddr or hacked the dos.

edit. If you did hack the dos you can change the container volume from the default 2000ml to anything up to 150000ml if you’re trying to visualize your mixing station volume in fusion. The remove side won’t matter on the graph as it doesn’t go negative

 

[nuxx Verified Sponsor]

So different from the old APEX setup.

I just had my DoS kick out and in 10 gallons as fast as it could once a day.

Did it around lunch time just in case anything went wrong.

 

[Zero_Cool]

I was able to set it up via tasks. It runs for 5 hours between midnight and 5am.