Basement sump dry fit plymbing.

  • Thread starter Thread starter Stang67
  • Start date Start date
  • Tagged users Tagged users None

Stang67

KEEP CALM AND REEF ON
View Badges
Joined
Mar 26, 2019
Messages
13,703
Reaction score
61,231
Location
CLE
What state or country do you live in
Ohio
Rating - 100%
1   0   0
Here's what I have. I will be moving the outlet up about 10 inches and using an outdoor cover so that you can ignore. I am going to get hangers as well to help support the drain line. Othe than that see anything I'm missing?
_20200225_180843.JPG
 
Anyone else see anything i may be missing? plan on gluing it this afternoon......
 
I would not recommend a check valve as they are known to fail. Ensure there is enough sump capacity for the display tank to drain without overflowing the sump even if a check valve is installed. A siphon break should be used on the return pipe to ensure that air quickly breaks the siphon. It is easy to maintain a siphon break as its just a small hole 1/8"-1/4" drilled in the return with an optional piece of tubing that is just above the waterline of the display tank. As long as water is running out of the siphon break while the pump is running it should work. I would also consider making a sump tank cover to reduce evaporation and salt spray.
 
I would not recommend a check valve as they are known to fail. Ensure there is enough sump capacity for the display tank to drain without overflowing the sump even if a check valve is installed. A siphon break should be used on the return pipe to ensure that air quickly breaks the siphon. It is easy to maintain a siphon break as its just a small hole 1/8"-1/4" drilled in the return with an optional piece of tubing that is just above the waterline of the display tank. As long as water is running out of the siphon break while the pump is running it should work. I would also consider making a sump tank cover to reduce evaporation and salt spray.
Thanks Alex, I didn't put a check valve on because of the research i read about possible failure. The Sump is a 40g Breeder and the display is a 65g low boy (48 *24 *12)so we should be good with the overflow. A siphon break has been installed on the return pipe as well sorry i didnt show it. I also have some plexi glass that i can use as a cover. It wont be a full cover but i would say 50 -75% of the sump will have a cover on it in some capacity.
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 19 28.8%
  • I’d trust someone who knows my tank to choose

    Votes: 2 3.0%
  • I’d rather get a gift card and pick it myself

    Votes: 24 36.4%
  • I’d prefer gear or supplies instead

    Votes: 2 3.0%
  • Please don’t surprise me with livestock

    Votes: 19 28.8%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new