Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I very gently flipped it over, but it soon flipped back onto its tentacles. My setup doesn’t have a sump. Any other suggestions? Should I place him on a rock? Maybe in the little indentation where the original BTA lived before it split?You need to upright him no matter what you do. If you plan on keeping him you do not want him picking his own spot floating around stinging things. Here is what I did, when mine split I put the Mother in a stationary plastic colander with a rock in the sump. (with a light source) When she attached to the rock I placed her in my QT tank eventually selling her and keeping the clone. It took a while for Nemo to accept the clone as she was not in the exact place the mother was in. (literally inches away)
Alk is low. The rest of the parameters are good. I’ll add some Reef Fusion 2 tonight and see if that helpsDepends on if it was a split for ideal conditions or one from a survival standpoint. Appears your tank is a mature one, so as long as parameters and lighting are correct, I would wait and see.
I did this and it flipped itself back over!I’d gently flip it over too and monitor it.
Yes, try again. If you can, set it in a spot that doesn't get direct flow and if possible, GENTLY hold it down for about 5 seconds, giving it a chance to attach its foot to the rock.I very gently flipped it over, but it soon flipped back onto its tentacles. My setup doesn’t have a sump. Any other suggestions? Should I place him on a rock? Maybe in the little indentation where the original BTA lived before it split?
I put it on the same rock as the other one, in an alcove a few inches away. I had to hold it up for awhile, but eventually it was able to adhere to the rock. It has its mouth open and some weird stuff is hanging out of it, but it seems to be doing a bit better. I’m keeping my fingers crossed and will report back in the morning. Thanks for all the advice, I really appreciate itYes, try again. If you can, set it in a spot that doesn't get direct flow and if possible, GENTLY hold it down for about 5 seconds, giving it a chance to attach its foot to the rock.
If that doesn't work, you can use an acclimation box (or a diy one made from a plastic container) and let it rest for a day or so.
But do not try to feed it right now.
It looks like it’s spilling its guts which is not a good sign. But I’d monitor him and hope for the best.I put it on the same rock as the other one, in an alcove a few inches away. I had to hold it up for awhile, but eventually it was able to adhere to the rock. It has its mouth open and some weird stuff is hanging out of it, but it seems to be doing a bit better. I’m keeping my fingers crossed and will report back in the morning. Thanks for all the advice, I really appreciate it
Considering it was upside down in the sand for a bit, it doesn't look too bad. Hopefully it will still be attached to a rock in the morning. Good luck and do keep us posted!I put it on the same rock as the other one, in an alcove a few inches away. I had to hold it up for awhile, but eventually it was able to adhere to the rock. It has its mouth open and some weird stuff is hanging out of it, but it seems to be doing a bit better. I’m keeping my fingers crossed and will report back in the morning. Thanks for all the advice, I really appreciate it
Instead of floating in the sump float in the display tank. Figure out a way to keep the colander stationary in your tank at the surface. You do not want the clone behind the rocks dying polluting your tank, at the top you can keep an eye on him until he attaches to the rock. Once the clone attaches to the rock and he looks ok you can place him anywhere in the tank he seems to like. Just make sure he is not under direct light while you float him at the top of the tank, he should be in the corner with the least amount of flow and light for now.I very gently flipped it over, but it soon flipped back onto its tentacles. My setup doesn’t have a sump. Any other suggestions? Should I place him on a rock? Maybe in the little indentation where the original BTA lived before it split?
You have a beautiful reef! I’ll try that trick with the floating colander if one of these guys ever splits again, but for now they both seem good. I have heard that about light/flow too, but this BTA has always loved being directly under the lamp and has tolerated very high flow. I tried to get it to move to a different rock once, by aiming the powerhead right on it and moving its rock incrementally closer over a period of a few days. It refused to budge and I finally gave up! After splitting, the mother immediately attached to a very bright and fairly high-flow area. Last night the clone moved into a higher-flow area from the low-flow spot where I had initially put it Instead of floating in the sump float in the display tank. Figure out a way to keep the colander stationary in your tank at the surface. You do not want the clone behind the rocks dying polluting your tank, at the top you can keep an eye on him until he attaches to the rock. Once the clone attaches to the rock and he looks ok you can place him anywhere in the tank he seems to like. Just make sure he is not under direct light while you float him at the top of the tank, he should be in the corner with the least amount of flow and light for now.
Many people say Nems don't like heavy flow or bright light and that may be true but not for mine.
My Monster
No problem. Thanks for the help!Well I am late to the party again it seems.
Good job !