Calmwaters First Saltwater Build

You can add vinegar to the tub.
Should foam then.
It'll be false foam but you'll get the general idea.
Run it that way for a bit It'll clean/ lube the thing.
 
It looks like an identical design to a Bubble Magus. They're good skimmers but I've never had one.
 
I'm curious if there was a.cap or plug on the bottom of the Tee originally but no one ever takes pictures of the underside of the skimmer...
 
Hey @Calmwaters , try turning the PVC pipe either direction and see if the flow increases some.
 
It was an old picture he had. It wasn't working when I bought it and he did tell me that it wasn't we were hoping it was just because it was dirty.
The original picture from the seller shows it running so unless something got lost between taking it down and setting it up at your house it should work.
 
So I'm thinking that he tried to fix it maybe... If that's a 3/4" PVC pipe, a 1" cap "should" fit on the bottom of the tee.
 
The link you sent previously shows the tee higher up with a valve in the side and a 90 below it. A cap on the bottom of the Tee would potentially fix that.
 
I will pick one up tomorrow and see if that works.
So I'm thinking that he tried to fix it maybe... If that's a 3/4" PVC pipe, a 1" cap "should" fit on the bottom of the tee.
 

TOP 10 Trending Threads

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 10 25.0%
  • Powerheads or wavemakers

    Votes: 3 7.5%
  • Sump or rear filtration chambers

    Votes: 5 12.5%
  • Skimmer or other filtration equipment

    Votes: 4 10.0%
  • Overflow or plumbing

    Votes: 8 20.0%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 9 22.5%
  • Other—tell us what I missed

    Votes: 1 2.5%
Back
Top
Home
Post thread…
Market
What's new