Diaphragm Pump

Metasyntactic

Community Member
View Badges
Joined
May 8, 2018
Messages
74
Reaction score
63
Location
Washington DC
Rating - 0%
0   0   0
I'm curious if people use diaphragm pumps with their aquariums? Since it's self priming, I'm thinking of putting my sump in a large plastic bin (one of those under the bed storage containers) with a diaphragm pump and a water detector so, if my sump somehow does overflow, the pump can drain the water into my waste water line.

The fact that they're self priming seems ideal in low GPH situations like vacuuming tanks or water change stations. The actual diaphragm mechanisms are generally corrosion resistant plastic and silicone so, as long as you aren't exposing the actual motor to salt water, it seems great for aquariums. I'm just surprised more people don't use them and wondering if there's a reason why.
 

Gareth elliott

Read, Tinker, Fail, Learn
View Badges
Joined
May 7, 2017
Messages
5,470
Reaction score
6,903
Location
NJ
Rating - 0%
0   0   0
I recently attached my ato to a diaphragm pump. Its louder than the submersible but i dont have the same worries. Also isnt in the reservoir so that is one less electronic i have to worry about water damage. Was definitely more expensive lol
 

ca1ore

10K Club member
View Badges
Joined
Oct 28, 2014
Messages
14,193
Reaction score
19,711
Location
Stamford, CT
Rating - 100%
2   0   0
There are certainly diaphragm pumps available for low flow applications. I use the avast version, for example, on all of my ATOs. There was an effort many years ago to market a diaphragm-based return pumps based on the presumption that traditional centrifugal pumps were lethal on plankton. I recall one unit coming to market (though cannot recall the name), but the GPH was quite poor and it was noisy. Disappeared pretty quickly. I think the general experience of most is that traditional pumps aren't actually as hard on plankton as had been claimed; plus free swimming plankton is almost non existent in captive tanks anyhow. Diaphragm pumps are good in certain applications with low flow and where noise is less concerning.
 
OP
OP
Metasyntactic

Metasyntactic

Community Member
View Badges
Joined
May 8, 2018
Messages
74
Reaction score
63
Location
Washington DC
Rating - 0%
0   0   0
Yeah,
There are certainly diaphragm pumps available for low flow applications. I use the avast version, for example, on all of my ATOs. There was an effort many years ago to market a diaphragm-based return pumps based on the presumption that traditional centrifugal pumps were lethal on plankton. I recall one unit coming to market (though cannot recall the name), but the GPH was quite poor and it was noisy. Disappeared pretty quickly. I think the general experience of most is that traditional pumps aren't actually as hard on plankton as had been claimed; plus free swimming plankton is almost non existent in captive tanks anyhow. Diaphragm pumps are good in certain applications with low flow and where noise is less concerning.

Yeah, I'm looking at them as safety pumps in case of a sump leak, ATO, and for vacuuming, nothing that will be running constantly. I'd also be curious to see how it does dosing food since peristaltic pumps can be a bit slow if you want to put out a lot of food quickly. That said, I suspect the diaphragm would get clogged with any food and probably smush it. Mostly I like that I don't have to prime the pump since self priming pumps are normally so ungodly expensive.
 

ca1ore

10K Club member
View Badges
Joined
Oct 28, 2014
Messages
14,193
Reaction score
19,711
Location
Stamford, CT
Rating - 100%
2   0   0
Certainly the avast would not take kindly to chunks. The inlet and outlet ID are very small.
 

ca1ore

10K Club member
View Badges
Joined
Oct 28, 2014
Messages
14,193
Reaction score
19,711
Location
Stamford, CT
Rating - 100%
2   0   0
That's similar to the RODI booster pumps.
 

Griepp06

Active Member
View Badges
Joined
Jun 10, 2021
Messages
129
Reaction score
56
Location
Minnesota
Rating - 0%
0   0   0
I am bringing this conversation back from the grave. I am using 3 dosing pumps for my old saltwater out, new saltwater in, and freshwater top off automated with a controller. The dosing pumps were doing about a gallon a day each and i have had 2 pumps die on me lately after because I upgraded the rank size and now they are doing 3 gallons per day each and that is anywhere from 35 to 55 minutes to pump the 3 gallons. From your experience into looking at diaphragm pumps even a low volume 1 GPM would only run 3 minutes per day. My only worry is any of the internals that would leech chemicals into the going in saltwater. I wouldn’t care about the going out saltwater as it goes down the drain. It doesn't seem like this subject has been discussed much since this is conversation is 7 years old and the only one i could find.
 

TOP 10 Trending Threads

HOW DO YOU ADJUST YOUR CUC AS ALGAE DISAPPEARS?

  • Capture and re-home CUC

    Votes: 2 4.7%
  • Increase white light/hours in tank to spur algae growth to feed CUC

    Votes: 2 4.7%
  • Feed nori to support CUC

    Votes: 17 39.5%
  • Feed herbivore pellets to support CUC

    Votes: 11 25.6%
  • Allow attrition to balance CUC and algae

    Votes: 22 51.2%
  • Provide macro algae to feed CUC

    Votes: 5 11.6%
  • Introduce CUC predators

    Votes: 1 2.3%
  • Other (please explain)

    Votes: 4 9.3%
Back
Top