fishface NJ
5000 Club Member
View BadgesNJRC Member
Hospitality Award
Water Gap Reef Club
MAC of SW Florida
Rock Pool Reef Keepers
My Tank Thread
They are universal and just that one needs to be changed
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
OkThey are universal and just that one needs to be changed
I buy universal cartridges so should be. You can take housing with you to confirm if buying localJust that one though right? Are they universal? Or do I need to find one that fits that unit specifically?
Yeah I'll need to try local first. Thank youI buy universal cartridges so should be. You can take housing with you to confirm if buying local
Just that one, just find one that has the same size ports(probably 3/8 inch) where the they screw in. Or another option is bulkreefsupply, they sell them ready to go with the water line already attached. Your water lines are 1/4 inch.Just that one though right? Are they universal? Or do I need to find one that fits that unit specifically?
Some Home Depot and Lowes sell them too.Yeah I'll need to try local first. Thank you
Just that one, just find one that has the same size ports(probably 3/8 inch) where the they screw in. Or another option is bulkreefsupply, they sell them ready to go with the water line already attached. Your water lines are 1/4 inch.
It's refillable, I refilled mine from a BRS refill kit.It is also possible that everything is plumbed correctly and that your DI cartridge has the 2 separate resins one on top of the other, rather than mixed throughout. SpectraPure silica buster DI cartridges are (or at least used to be) filled this way...
Is the resin packed tightly? I still feel like your in and out are switched with the resin coloring backwards.
Yeah I couldn't pack it any tighterIs the resin packed tightly? I still feel like your in and out are switched with the resin coloring backwards.
Look at first post to see his. His resin is coloring from top down and is getting 8 TDS after the resinIt appears discolored and many come with color change feature. Your TDS and resin color will determine need
Then somehow your flow is backwards as many have said. You can test that by putting empty cartridge in the housing with no water in it, then letting flow start. If water comes down the outside of the canister, flow is correct. If it comes down middle, the flow is backward.It's refillable, I refilled mine from a BRS refill kit.
Yes but it has 1/2 inch ports IDK what size yours are.
How's that? I'll take fittings from my old one
Idk. I'll just take the whole unti down to my lfsYes but it has 1/2 inch ports IDK what size yours are.
You didn't buy chance crack the lid when you replaced it did you?It's refillable, I refilled mine from a BRS refill kit.
The lid to what? The resin or canister?You didn't buy chance crack the lid when you replaced it did you?
The lid on the resin cartridge. Screwed on right and not stripped or cross threaded?The lid to what? The resin or canister?
It screws in from the bottom, it looks to be put on correctly.The lid on the resin cartridge. Screwed on right and not stripped or cross threaded?
OkIt screws in from the bottom, it looks to be put on correctly.