Fiji 38 gallon issue high level overflow

[tlatix]

Hi everyone, I just set up my 38-foot Fiji peninsula. The return pump is running at its maximum speed, and the overflow and display water levels are high. Is the weird thing on the bottom related to some adjustment?

 

[fishface NJ]

The object you circled is the bottom weir. You have a top and a bottom weir in your AIO 38 gallon. From looking on Fiji website, there is a clear acrylic sliding object that allows water intake adjustment, that is on the bottom weir

 

[tlatix]

The object you circled is the bottom weir. You have a top and a bottom weir in your AIO 38 gallon. From looking on Fiji website, there is a clear acrylic sliding object that allows water intake adjustment, that is on the bottom weir

Thank you! I turned the return pump down to 30% from 100%, but the water level in the display is still over half the top weir. I'm not sure if this is how it was designed. The water level is less than an inch from the rim, and I'm just annoyed by how high it is.

 

[fishface NJ]

What is the position of the acrylic slide over the bottom weir?

 

[fishface NJ]

Did you over fill your tank...this is an AIO tank

 

[tlatix]

What is the position of the acrylic slide over the bottom weir?

1/4 “ open

 

[tlatix]

Did you over fill your tank...this is an AIO tank

No, I remove more water, the level still the same in the display.

 

[Nburg's Reef]

That pump is too strong for the tank… I turned my pump to 30% and all is well

 

[tlatix]

That pump is too strong for the tank… I turned my pump to 30% and all is well

Thank, I thought my design is defective or something.