I hope the storm is just mild as I’m horrified of lightning.
I used to love it.
Got struck 7/6/2001. Changed a lot of things.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I hope the storm is just mild as I’m horrified of lightning.
1. I pull about 40’ with no issues.about to run the lines for the AWC before I put up the paneling (moisture proof). I have questions.
1. Is it better to push or pull with the DOS over a 30 foot distance?
2. Is it better to use big arcs or push connect elbows? (I want to limit leak points and none will be in a wall)
3. Will it get hot enough in the attic to make much of a difference? (I know before we got the new roof put on it got to 127 in the attic haven't tested since.)
I need to know ASAP how to proceed.
I appreciate your input.
1. I pull about 40’ with no issues.
2. I used arcs and not push connect 90s
3. It will get hot enough to condensate on the line. I would run a 1/2” pvc for the run in the attic and then feed the line through it. Then make sure pvc run is to where it can drain out one way or another. If that makes sense. Or you could seal each end of the pvc run and it will now be insulted (air barrier) and should not condensate.
Check out my build thread. Work in fish barn still in progress, but you can see all the macro collected. Zoas are ticked right now, so once they open up, will add pics of them.Thanks!
Good to hear from you. How was your trip? lots of pics?
Not bad at all. Be safe out of town and have the wife yell at me, or you can yell at me if you need anything with the tanks done while you are gone. I got yo back homie.Ok, skimmers done, top off done and doser setup.
I should have setup the doser months ago. So easy... once I figured out it's clock is on EST and you can't change it! lol
So, I just set the times to run an hour later than I wanted.
Also, cleaned the lizards enclosure, made a pan of mac and cheese and a triple batch of garlic walnut tortellini for a cookout and started getting my clothes packed up for the trip. Not too shabby by noon.
Not bad at all. Be safe out of town and have the wife yell at me, or you can yell at me if you need anything with the tanks done while you are gone. I got yo back homie.
Pics of AIO? and how many gallons is it?Well everything is alive and well and the doser worked perfectly. The alk is holding steady at 9.6. I am going to dose 1ml less of all 4 reef to bring it to around 9 over the course of the next few days.
Got driftwood on the way for the FW angel tank from a friend in missouri who sells really nice pieces of driftwood.
I put in enough hours to make two weeks pay in a wee and took off at 11 today.
I need a 125 for my discus. I want to sell the AIO acrylic tank sitting on the RSR625 stand.