Flip's Reef
- Build Thread
- Thread starter Flipside
- Start date
- Tagged users None
OP
OP
Flipside
Well-Known Member
Thanks man! :D
So, basically, the way we (a good friend and his journeyman electrician that works for him) laid this out is the metal clad runs (12/2 wiring) are for 120v receptacles. The GFCI gets hit by the power first, then I have an extra receptacle in the gang ran in series thereafter. That way if the GFCI hits, the whole gang shuts down (series). Standard, but just saying. Both of the gangs seen with metal clad above them are ran to a single pole, 20A breaker in the subpanel. This gives me way more than I'll ever need for the life support of my system. Heck, I can even use the plugs for any other garage tools that I may need to run.
The 230v feed was ran with 10/3 Romex in 3/4" EMT (metal conduit). Yes, that's way overkill, but it was actually cheaper than running single wires through the EMT. Weird, but whatever. The receptacle is a standard 3 plug receptacle that you would see for a dryer in your laundry room. This one runs back to the subpanel, hitting a 30A, dual pole breaker. The cool thing about this outlet is that it can be used for a big air compressor or MIG welder should I need it. I love using those tools, and it's nice to have that option in the garage now. Of course, this summer (Houston gets a little hot in the summer) I plan on using it for the 1HP chiller. The chiller I have runs on 5.5A, and this receptacle is more than enough to keep it happy.
This week, I plan on getting the plumbing done on the chiller. I'm going to send water to it using a Laguna/Askoll 1500 pump, but plan to build a better manifold for it because the Laguna is a pretty powerful pump (torquey!). I'm also going to use the Laguna for returns to the 40g breeder tank that I just got, and the refugium. So, I guess there's a lot of plumbing in my near future. :)
Boring post, but informative for my sake. I forget everything so I like to write it down while it's fresh. :D
Have a great Monday, R2Rers!
So, basically, the way we (a good friend and his journeyman electrician that works for him) laid this out is the metal clad runs (12/2 wiring) are for 120v receptacles. The GFCI gets hit by the power first, then I have an extra receptacle in the gang ran in series thereafter. That way if the GFCI hits, the whole gang shuts down (series). Standard, but just saying. Both of the gangs seen with metal clad above them are ran to a single pole, 20A breaker in the subpanel. This gives me way more than I'll ever need for the life support of my system. Heck, I can even use the plugs for any other garage tools that I may need to run.
The 230v feed was ran with 10/3 Romex in 3/4" EMT (metal conduit). Yes, that's way overkill, but it was actually cheaper than running single wires through the EMT. Weird, but whatever. The receptacle is a standard 3 plug receptacle that you would see for a dryer in your laundry room. This one runs back to the subpanel, hitting a 30A, dual pole breaker. The cool thing about this outlet is that it can be used for a big air compressor or MIG welder should I need it. I love using those tools, and it's nice to have that option in the garage now. Of course, this summer (Houston gets a little hot in the summer) I plan on using it for the 1HP chiller. The chiller I have runs on 5.5A, and this receptacle is more than enough to keep it happy.
This week, I plan on getting the plumbing done on the chiller. I'm going to send water to it using a Laguna/Askoll 1500 pump, but plan to build a better manifold for it because the Laguna is a pretty powerful pump (torquey!). I'm also going to use the Laguna for returns to the 40g breeder tank that I just got, and the refugium. So, I guess there's a lot of plumbing in my near future. :)
Boring post, but informative for my sake. I forget everything so I like to write it down while it's fresh. :D
Have a great Monday, R2Rers!
OP
OP
Flipside
Well-Known Member
I appreciate it man! It definitely took a load off my mind. :) I'm shopping for PVC parts right now. LOL!
On a sidebar, I didn't know Gorilla Glue made PVC cement! I have to try it!
OP
OP
Flipside
Well-Known Member
Got the chiller plumbed in last night! :D
This next shot is of the chiller's controller after a few minutes. It was at 85 when I started.
3 minutes
15 minutes
Nem getting a little tickered-off! LOL!
30 minutes
Had one of these, and hit the sack.
This next shot is of the chiller's controller after a few minutes. It was at 85 when I started.
3 minutes
15 minutes
Nem getting a little tickered-off! LOL!
30 minutes
Had one of these, and hit the sack.
OP
OP
Flipside
Well-Known Member
It's not a law or anything. It's really hard to pull it through EMT, too. You can use it, but a lot of journeymen find it to be more of an annoyance than anything else. I only did it because it was cheaper this way. Weird.
Thanks Cat! I'm very happy today! Tank is hovering around 80, and my livestock is looking very happy. :) My CBB almost ate some flakes just now! LOL
Thanks Cat! I'm very happy today! Tank is hovering around 80, and my livestock is looking very happy. :) My CBB almost ate some flakes just now! LOL
OP
OP
Flipside
Well-Known Member
It's a beast, sir! :D I'm not concerned in the least about heat this summer. I am working with another friend on another forum on possibly closing that room off, adding a little window AC unit, and have the chiller setup to where it's drawing cooler/dryer air in, and blowing the warm air out into the garage somewhere, though. I'm just going to wait and see how things play out like this, first. :)
In other news, I just ordered 1 lb. of blackworms, three worm keepers, and 2 clear feeder cones from California Blackworm Co. I got a CBB the other day. :) He's eating fine, but nothing dry. Would like to see if I can fatten my guy up as much as Cat's look! :D
I did find out last night that my Psychedelic Mandarin LOVES frozen krill!!! I thawed some out in some tank water, added some Selcon, and he was NOM NOMing away! It was a heckuva site!
In other news, I just ordered 1 lb. of blackworms, three worm keepers, and 2 clear feeder cones from California Blackworm Co. I got a CBB the other day. :) He's eating fine, but nothing dry. Would like to see if I can fatten my guy up as much as Cat's look! :D
I did find out last night that my Psychedelic Mandarin LOVES frozen krill!!! I thawed some out in some tank water, added some Selcon, and he was NOM NOMing away! It was a heckuva site!
Man, I'm so in need to see this.
My crews are all working in the Benders Landing and I know that's not that far from you.
Let me know when you got a day off and I'll swing by.
My crews are all working in the Benders Landing and I know that's not that far from you.
Let me know when you got a day off and I'll swing by.
zibba
Valuable Member
Haha, those are going to last you FOREVER if you keep up with them. I've had a small portion in my fridge for at least 4-weeks that I swear is reproducing in the little container in my fridge. The fish love the blackworms but I've mostly been using them for LPS food -- they go NUTS! One of my favorite foods to feed the tank, hands down.
OP
OP
Flipside
Well-Known Member
Got them today, dude. You're right! The fish went nuts! The CBB's belly is fat now. :D
I got a little mini/bar fridge for them. It's in the garage now. I'm going to make sure it gets cold enough before I put the worms in there.
I got a little mini/bar fridge for them. It's in the garage now. I'm going to make sure it gets cold enough before I put the worms in there.
OP
OP
Flipside
Well-Known Member
https://www.youtube.com/watch?v=gmV3zqQ0NB8
Audioswap in progress. Just some random song on there to mask the game in the background, and a text drop on my phone. LOL!
Oh, looks mucho better in HD. ;)
Audioswap in progress. Just some random song on there to mask the game in the background, and a text drop on my phone. LOL!
Oh, looks mucho better in HD. ;)
renoeb
Active Member
DOG FISH HEAD 90 MINUTE and a beautiful rimless reef, ugh! I feel like you are the more well-to-do version of my college student being.
Awesome tank!
Not to mention all the other bad *** craft brews I see.
Awesome tank!
Not to mention all the other bad *** craft brews I see.
OP
OP
Flipside
Well-Known Member
Kind of a bummer but I had to move the Imperator to the refugium. :( He was nipping at my Mille's. Dork! I still love 'em. ;) Also moved the puffer back to that tank. He seemed a bit lethargic in the community tank.
Another problem I noticed is my corals are showing signs of too much nutrients in the tank. GFO and biopellets, here I come! :) :( I hate sandbeds!
Another problem I noticed is my corals are showing signs of too much nutrients in the tank. GFO and biopellets, here I come! :) :( I hate sandbeds!
Well, we have Jaws Music.............a classic if it comes to scary stuff in the water!
Now 2013 we got.............Worm Music, as scary to see but not the Music, LOL.
On the nutrients note, stay away from the Biopellts.
GFO, is the way to go, only because you mention it.
Do I use it.............................NOOOO!
Went with ZEOvit.
There is a product from zeovit that helps with nutrients, called zeozym.
Just look it up, used only once a week and the jar last a life time.
Btw, Nice Video L.
Now 2013 we got.............Worm Music, as scary to see but not the Music, LOL.
On the nutrients note, stay away from the Biopellts.
GFO, is the way to go, only because you mention it.
Do I use it.............................NOOOO!
Went with ZEOvit.
There is a product from zeovit that helps with nutrients, called zeozym.
Just look it up, used only once a week and the jar last a life time.
Btw, Nice Video L.
Similar threads
