Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hmmm, this might make me happy that I haven't decided on a controller just yet.
@Vinny@GHLUSA quick questions regarding how it regulates the calcium. lets say I use brs calcium and the system doeses it accordingly. how does the system know if I switch calcium products or if I mix my calcium up stronger to lower or raise the dose? is there an input to tell the system how many ml of calcium would raise your tank.
I just don't understand the concept of how it know how much to dose. yes if its consistent I get this but if in the middle of testing you add more calcium to your container or change a brand and its stronger how does it know.Wondering this myself. I have the KH Director (which does the same) but I keep forgetting to look into how it does this.
If it works the same way as the KHD, you will set a nominal figure ie 400 and then what % of volume to adjust by depending on how much it deviates from the set point, these are my settings for my KHD@Vinny@GHLUSA quick questions regarding how it regulates the calcium. lets say I use brs calcium and the system doeses it accordingly. how does the system know if I switch calcium products or if I mix my calcium up stronger to lower or raise the dose? is there an input to tell the system how many ml of calcium would raise your tank.
but it doesn't test it whileit dosing correct? so what if you have it set to your set points but then you switch brands and don't change anything and it thinks o I still need 30ml and because the new cal is stronger it raises past your set points
Aah I see what you mean, if I change brands of Ca or ALK I would manually change the volume I dose accordingly on my dosing pumps (as you would do anyway) The director then measures and will adjust or not by the % set in the control. As it’s a % the strength or volume of the Ca dosed doesn’t really affect, it will just add or reduce them until the set point is reachedbut it doesn't test it whileit dosing correct? so what if you have it set to your set points but then you switch brands and don't change anything and it thinks o I still need 30ml and because the new cal is stronger it raises past your set points
makes since. but it can increase your dosage for you to maintain a set point. so there is still things you have to change yourself if there are changes to your dosing chemicals.Aah I see what you mean, if I change brands of Ca or ALK I would manually change the volume I dose accordingly on my dosing pumps (as you would do anyway) The director then measures and will adjust or not by the % set in the control. As it’s a % the strength or volume of the Ca dosed doesn’t really affect, it will just add or reduce them until the set point is reached
If you allowed it to 100% change volumes, it would handle it, but I would change mine myself to get the new dosing volume as close to what I think it would need to be as it might take the KHD several measurements to dial it in..makes since. but it can increase your dosage for you to maintain a set point. so there is still things you have to change yourself if there are changes to your dosing chemicals.
What would be interesting to know is if the PO4 can be added to the IOND:
-> soon?
-> by replacing the multi-parameter probe?
-> Will we be limited to ...
What would be interesting to know is if the PO4 can be added to the IOND:
-> soon?
-> by replacing the multi-parameter probe?
-> Will we be limited to 5 parameters that will have to be chosen or can we have more than 5 parameters?
OR it will it be a new dedicated device that will be designed later?
The switch from apex to GHL is looking more alluring