I turned on the skimmer yesterday (week 4 into my tank cycle). Its a 24g all in one setup. As soon as i turn the skimmer on, the tank water is filled with micro air bubbles(so much that the water appears cloudy). Is that a normal behavior?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Could be... do you have anything to diffuse the bubbles before being sent back to tank?
I had the same problem when my tank was new. Until there’s something in the tank to skim, it’ll do that. Probably pretty pointless to run it right now.
Right. But is it open to other compartments where they move through? A sponge in between would diffuse thatThe skimmer is in the 2nd tower and it goes through a 3rd tower with 3 media boxes (chemical and bio) before it flows to the last which has the return pump.
Right. But is it open to other compartments where they move through? A sponge in between would diffuse that
Hard for me to tell by the pic, often times once a skimmer is broken in the problem will solve itself. I used sponges to help mineBelow is the layout if that explains-
Hard for me to tell by the pic, often times once a skimmer is broken in the problem will solve itself. I used sponges to help mine