Mitra lx6100
- Thread starter RJKain-777
- Start date
- Tagged users None
Mitras 6100 is 1st gen light by ghl. Great light and platform. If i were you. I would probably replace all the pucks in each light and upgrade them to 6300's if you have the cash.
If not the 6100 is a great light and will serve you well.
If not the 6100 is a great light and will serve you well.
OP
OP
RJKain-777
Well-Known Member
Thanks, went to order the upgrade clusters, they only have 3 in stock. Guess I’ll be upgrading one of the lights!
Once you have them upgraded you will have brand new lights. The 6300's offer more of blue spectrum than the 6100 pucks. I ran the 6100 pucks for many years and had great color from everything. I just prefer the bluer look. Good luck.
The mitras can all be synched together and the cloud features etc. are the best I have seen in any light. If you only upgrade one of the lights you will have some issues if you want to synch the color scheme across all the lights. You will probably have to put individual program in the 6300 and then just put it on the same frequency when you add it. thats because the pucks will have different led spectrum on them.
The mitras can all be synched together and the cloud features etc. are the best I have seen in any light. If you only upgrade one of the lights you will have some issues if you want to synch the color scheme across all the lights. You will probably have to put individual program in the 6300 and then just put it on the same frequency when you add it. thats because the pucks will have different led spectrum on them.
OP
OP
RJKain-777
Well-Known Member
Yeah the HV channel is a separate channel, but the pucks have the standard UV. The puck replacements come in a pack of 2 it seems. There site says they have 3 in stock, so enough to do one light. I emailed support to see how long it takes to get the rest, once I find out, I’ll order them. Or I may just order 4 orphek OR bars to add that bluer spectrum/ more UV
OP
OP
RJKain-777
Well-Known Member
I wanted to go with Atlantiks, but at $1500 each Canadian, or wasn’t really an option. So you think the upgrade kit or the OR bars?
Johndicko
New Member
Which "type"?
I believe there are plenty of places to get one from
You can go cheaper as long as you match specs and can tolerate an "open frame" power supply and a fan.
Please not ..afaict.. this model is in short supply.
350W over the orig 240W but all that really matters is the 24V and "enough" watts..more is fine, to a point (an efficiency thing).
LRS350-24
Come to think of it does the HLG fit in a sort of external "box".
The frame probably wouldn't..but just a wiring thing.
Assumption.. HLG is run constant voltage.
Last edited:
Similar threads
