My PVC from return moves help

  • Thread starter Thread starter Deezill
  • Start date Start date
  • Tagged users Tagged users None

Deezill

Valuable Member
View Badges
Joined
Sep 29, 2017
Messages
1,320
Reaction score
1,052
Location
Chicago
Rating - 100%
1   0   0
hey, guys, I have my plumbing set but my problem is that my 1" PVC from my return moves. I guess because of the check valve that's on it is heavy how can I make it steady and not move. Thanks for your help. Post links to what I would need. Once again thanks.

pipe.JPG

P.S
I know I ran out of blue PVC screw it. I will spray paint the white part. Maybe.
 
Last edited:
You can glue a nylon pipe clamp to back or obtain a sticky tie strap mount and zip tie it firm
1576215371721.jpeg
 
Where do I get this.
Any place with computer supplies.... home depot, menards and these can be used alis to tie down your power head cords and other wires/ cables for neat organization
 
Not sure if your joking but I’m really considering
I was just joking lol. I thought about suggesting zip ties before I saw your picture, but then after seeing it I wasn't surr how it could work. I didn't realize there were such a thing as sticky tie mounts until @vetteguy53081 made his post. Learn something new every day.

moreyouknow.gif
 
Dont rely on the sticky tape on the bases to last.
The adhesive on most of them fail.
I recomend applying some superglue to the pad.
Especially on stuff that will vibrate.
But the problem you may have is the zip tie pads are thin, and you will have a gap.
You can use conduit hangars and one of these can be screwed to the stand and then clamp it.
These hangars hold the conduit off the surface by about a half inch. These are also called Minerallac straps. Can be found in all hardware stores.
 
Dont rely on the sticky tape on the bases to last.
The adhesive on most of them fail.
I recomend applying some superglue to the pad.
Especially on stuff that will vibrate.
But the problem you may have is the zip tie pads are thin, and you will have a gap.
You can use conduit hangars and one of these can be screwed to the stand and then clamp it.
These hangars hold the conduit off the surface by about a half inch. These are also called Minerallac straps. Can be found in all hardware stores.
Im actually on year 3 of the sticky tape holding. Then again I cleaned area well with alcohol for best chance of adhesion
 
The plastic zip tie mounts work great, I’m using them on 2 tanks to support PVC pipes. As others have mentioned just make sure to clean and prep surface to insure proper adhesion.
 
I found some of those peel and stick pads with the zip ties on amazon.
 
You can glue a nylon pipe clamp to back or obtain a sticky tie strap mount and zip tie it firm
1576215371721.jpeg

+1

For anyone reviewing this thread in the future, you can also find these online by searching "zip tie adhesive mounts".
 
Thanks to everyone with input. I went with the zip ties and the adhesive backing. I also added crazy glue to ensure it would not move. I used 6 zipties with backs. Solid. I am prepping rodi water for a leak test now. I will update my build thread soon with the journey. I'm moving forward.

P.S
My spray paint game needs work :)

stuck.jpg sump.jpg
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.7%
  • Fish or coral food

    Votes: 5 5.5%
  • Test kits or reagents

    Votes: 9 9.9%
  • Filter media or replacement fleece

    Votes: 5 5.5%
  • RO/DI filters or supplies

    Votes: 14 15.4%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.0%
  • I keep a backup of everything

    Votes: 24 26.4%
  • Other (Post in the comments)

    Votes: 7 7.7%
Back
Top
Home
Post thread…
Market
What's new