NeoPhos

  • Thread starter Thread starter Campy10
  • Start date Start date
  • Tagged users Tagged users None

Campy10

Community Member
View Badges
Joined
Jul 20, 2018
Messages
90
Reaction score
58
Location
San Diego
What state or country do you live in
California
Rating - 0%
0   0   0
I started dosing NeoPhos as my phosphates were down to 0 and i was combating a Cyno problem. I have been dosing for the last 2 weeks each day after measuring levels with RedSea Phosphate test but still no signs of Phosphate. I think the Cyno has slowed down but still there. At this point i have almost dosed the whole bottle and still not signs of Phosphate. I also checked with an API test once and that didnt register Phosphate.

Any suggestions or recommendations would be appreciated.

I did dose NeoNitro to raise Nitrates and that was successful.
 
I started dosing NeoPhos as my phosphates were down to 0 and i was combating a Cyno problem. I have been dosing for the last 2 weeks each day after measuring levels with RedSea Phosphate test but still no signs of Phosphate. I think the Cyno has slowed down but still there. At this point i have almost dosed the whole bottle and still not signs of Phosphate. I also checked with an API test once and that didnt register Phosphate.

Any suggestions or recommendations would be appreciated.

I did dose NeoNitro to raise Nitrates and that was successful.

That’s very likely an issue with the test kit. I’d be surprised if you have such an efficient phosphate export in your tank. I would try getting a Hanna checker.
 
How big is your tank? how much are you dosing? Are there any other types of algae besides the cyano?
 
The DT is 180 gallons. Sump is around 70 gallons. I have been dosing 10ml every 24 hours.
 
I don't know how diluted that stuff is as I've never used it, but when I dosed nitrates in the past, I feel like I was using a lot more than that on a system less than half that size.
 
I don't know how diluted that stuff is as I've never used it, but when I dosed nitrates in the past, I feel like I was using a lot more than that on a system less than half that size.
Neophos, not Neonitro...I had a few beers on my lunch break...

I have actually used Neophos, and I still feel like you may be under doing it. I would definitely get a second opino on your testing before making any other changes. maybe take a sample to an LFS.
 
I dose both NeoPhos and NeoNitro with good results. There are delayed results in my experience at the recommended dose of about a week or 2 to start seeing levels rise. Once they do start to rise though they seem to rise quickly so I'd caution going too high on the dose or you may get a spike once it starts to register.

10ml per day on 250g isn't a whole lot for a heavy stocked tank so it might make sense that you haven't seen any rise yet. Is this a heavily stocked mature tank?

What PO4 test are you using?
 
Last edited:
If you're looking for precision, hanna phosphate checker is your key. I've used api with zero reading, then was shocked to find with a hanna i was at .20......
 
I dose both NeoPhos and NeoNitro with good results. There is are delayed results in my experience at the recommended dose of about a week or 2 to start seeing levels rise. Once they do start to rise though they seem to rise quickly so I'd caution going too high on the dose or you may get a spike once it starts to register.

I can report exactly the same experience with neophos. I guessed that some of it was being absorbed by rock or substrate and once that was saturated the levels would rise rapidly. But it's just a guess ...
 
The tank is lightly stocked with 3 different tangs, small trigger, 2 clown and a lawnmower blenny.

I think ill get Ultra Low Hanna before adding anymore NeoPhos
 
Q - Any reason I can't dilute the NeoPhos solution? I need to dose about 2.5ml a day and would much rather do a 5:1 ratio mix w/ RODI water, allowing me to dose 12.5ml a day, better spacing it out.
 
I'm having a similar issue, i've been dosing neophos in my coral qt, its been about 3 weeks for me and im still getting nothing. Im using 2 hanna checkers a LR and a ULR i normally get 0 maybe .1 on the lr and 8 was the highest i got on ULR. Its a 25 gallon tank with about 15 frags and a maxima clam, 12 or so hermits and 20 or so snails. I feed the corals every other day and dose 10ml of neophos daily. Today i was off work so i was able to test it several times. After Dosing I had 1o ppb on the hanna ulr, and around 5 nitrates, 2 hours later i tested and 0 on the ULR and still 5 nitrates. I wonder if they clam is sucking it all up but i was having the same issue before i added it, however not as bad.

Just wanted to add I'm using a fairly basic filter system with just biocubes, filter socks and a skimmer but i took the skimmer offline yesterday.
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 2 9.5%
  • Lighting, pumps, or other major equipment

    Votes: 3 14.3%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 9.5%
  • Dry goods and restocks, like salt, media, or food

    Votes: 2 9.5%
  • Corals! Must...Have...CORALS!!!

    Votes: 5 23.8%
  • Fish or other livestock

    Votes: 0 0.0%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 4.8%
  • I’m browsing, but don’t have a specific target

    Votes: 4 19.0%
  • I’m not shopping for reef deals this year

    Votes: 1 4.8%
  • Other (Post in the comments)

    Votes: 1 4.8%
Back
Top
Home
Post thread…
Market
What's new