New Lid Wont Fit

[Ammocan]

Just got my new lid for my Red Sea reefer 350 and it will not fit. There is not enough clearance for my power head wires. Are these made for Ecotech only? What are people doing when their power heads have wires?

Thanks,

 

[Legal Reefer]

What's the lid frame material? If it's acrylic or polycarbonate I would just notch it out with a drill bit or grinder so it would fit snugly around the power cords.

 

[ksfulk]

If you have powerheads with wires in the tank, typically you would ask to have AA notch out cord pass throughs - thats what I did on my lid for my 525xL. If you didnt have them cut notches for you when you ordered it, I would give them a call and see how they recommend cutting the notches into the lid yourself - just so you arent voiding your warranty or anything.

@ArtFully Acrylic

 

[Legal Reefer]

The places I've seen that make the lids usually ask about power cords and anything else the lids need to fit around.

 

[Ammocan]

Yeah it would have been nice to know that ahead of time. Maybe they should add it as an option and they could even charge for it like everything else. Oh well I will have a brand new expensive lid with home made notches in it. Also looking at the quality of this they do not do anything extra like polishing, the routed edges are left raw.

 

[Antics]

Yeah it would have been nice to know that ahead of time. Maybe they should add it as an option and they could even charge for it like everything else. Oh well I will have a brand new expensive lid with home made notches in it. Also looking at the quality of this they do not do anything extra like polishing, the routed edges are left raw.

There is literally a drop down box on the order page for you to signify that you will need custom cut outs.

 

[gashunk]

There is literally a drop down box on the order page for you to signify that you will need custom cut outs.

I was thinking the same thing it’s right there on the page lol

 

[Ammocan]

I saw that but it never crossed my mind to get custom cutouts for wires. I am just saying it would have been nice to see a line saying not to forget about the wires. Chalk it up to poor research on my part.

Thanks Guys

 

[ClearView Lids]

Just got my new lid for my Red Sea reefer 350 and it will not fit. There is not enough clearance for my power head wires. Are these made for Ecotech only? What are people doing when their power heads have wires?

Thanks,

You can email us at [email protected] with your order number for more precise assistance.

Cord cutouts are not included in any lid by default. Custom cutouts often include cutouts for light mounts, cord slots, auto feeders, etc.. If you selected YES to "custom cutouts required" option when you checked out then we would follow up with you to ask for the details/specs needed prior to programming the lid if they weren't provided in the order comments at checkout. If you selected NO to "custom cutouts required" option then your order would go straight to scheduling to be CNC cut.

If you requested the cutouts and we missed them we are happy to work with you to fix it. Alternatively, if you accidentally missed this at checkout, or don't want to send in your lid, adding cord cutouts is pretty easy and can be done pretty cleanly with as little as a small dremel and some sandpaper.

 

[Ammocan]

Thanks for your response. Yes i did not think the cords would interfere because I did not know how the lid went on the tank. I used a Drexel and made my own notches. Maybe to help other folks you should add something to your website to remind them that there needs to be notches for the power head cords. The lid fits very nice and flush and it looks good on my Tank. Thanks again.

 

[Kinettik]

Thanks for your response. Yes i did not think the cords would interfere because I did not know how the lid went on the tank. I used a Drexel and made my own notches. Maybe to help other folks you should add something to your website to remind them that there needs to be notches for the power head cords. The lid fits very nice and flush and it looks good on my Tank. Thanks again.

Most of us don't have wires for our powerheads inside the tank.....

 

[ciscomania]

Most of us don't have wires for our powerheads inside the tank.....

I think most of us do....

 

[FLAdaboy]

I got one and it was a planning process. AA was very responsive the entire time. They do tell you all of that on their site. Read and double check sometime.

You can also try routing the cords through the feed hole. Hopefully you got one of those.

 

[Kinettik]

I think most of us do....

You just made a post about how much you love not having wires in your tank on your new powerheads...............

 

[TheHarold]

Most of us don't have wires for our powerheads inside the tank.....

Everyone that does not have expensive ecotech powerheads have cords in the tank :)

 

[Kinettik]

Everyone that does not have expensive ecotech powerheads have cords in the tank :)

I run Hydors, very cheap and no wires. ;)

 

[Water Dog]

What Hydor powerheads do you own that have no wires? Got a link?