Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thanks for the pic's and info.Thanks! I’ve been using the following “acrylic” tape with success for the past decade on inert surfaces such as glass and metal. My power transformer “bricks” of my XR15 G5 are taped to the underside of the tank too. Works well with under heat too. Another good alternative is 3M VHB. I did however put a small clear acrylic as a filler/spacer for the AFS to adhere on. BUT I wouldn’t recommend hang anything of power using adhesive tape over water though.
Looks very promising, I didn't see any previous post but did you add dry rock at all?DAY 2: Ammonia at 1.5mg/l (SALIFERT) or thereabouts.
I didn’t. But I had plenty to bio media in the sump though. Still dry scraping my Caribsea branches, may need more...Looks very promising, I didn't see any previous post but did you add dry rock at all?
Glad to share!Would you mind posting a picture of your return pump and the plumbing back to your system?
Also what diameter Plumbing are you using for your return and is that a 1in flow meter that you're using on the Apex?
I apologize if you've already covered this in previous posts.
Talking about that, mine too. I’ve been playing with couple of WAV configurations all this while, but to no avail.Looking really good man!! I had to remove my sand due to bald spots caused by my three pumps
Yeah it was annoying I kept putting it back every dayTalking about that, mine too. I’ve been playing with couple of WAV configurations all this while, but to no avail.
WAV is really too much, at 60% it’s still creating bald patches.Yeah it was annoying I kept putting it back every day