Replacement power block for Popbloom RL90

[TrampledByEwoks]

I had a freak overflow issue and water ended up soaking the power block of one of my Popbloom RL90s. Anyone know of where I can get a new power block?

 

[Rocks reef]

Those are 90 watt lights. Any 90 watt power brick will work. Amazon has a TON of them you can choose from.

Something like this should do the trick. It comes with different sized plugs as well.

Amazon.com

 

[oreo54]

I had a freak overflow issue and water ended up soaking the power block of one of my Popbloom RL90s. Anyone know of where I can get a new power block?

What is the output listed on the original?
Your can't use any 90w ps..

 

[Rocks reef]

Onerbl 24V AC/DC Adapter Replacement for PopBloom RS90 RS90P3-H TuringT90 RS90 Reef LED Saltwater Aquarium Light DSunY-MP-E6-1 DSunY-MP-E6-2 DSunY-24004000 DSunY24004000 24VDC 4A 90 W Power Supply - Walmart.com

Buy Onerbl 24V AC/DC Adapter Replacement for PopBloom RS90 RS90P3-H TuringT90 RS90 Reef LED Saltwater Aquarium Light DSunY-MP-E6-1 DSunY-MP-E6-2 DSunY-24004000 DSunY24004000 24VDC 4A 90 W Power Supply at Walmart.com

www.walmart.com

This is a link for a replacement for the same light sold by WalMart... says it's 90 watts.

 

[TrampledByEwoks]

What is the output listed on the original?
Your can't use any 90w ps..

This is the fried power block I need to replace.

 

[oreo54]

This is the fried power block I need to replace.

Any 24v and 4a or greater will do.
Normally i'd vote for a Meanwell caged ps but apparently you need more water protection.
Now there are plenty of cheap ps with those stats BUT you do get what you pay for here
LPV 100-24 will do.

Or this

My " style".. boosted wattage so ps runs softer .

 

[oreo54]

There are cheap ones that " may" be good .
Amazon product

Why this one over a few dozen other like power supplies? The one certification, IF legit.
It is a bit hard to verify though..

 

[oreo54]

A bit of an explanation...from AI

The GS mark, which stands for Geprüfte Sicherheit (German for "Tested Safety"), is a voluntary certification mark for consumer products in Germany and other European countries. It indicates that a product has been tested and certified by a third-party body to meet specific safety requirements, often exceeding those of the mandatory CE marking.



Key aspects of the GS mark:

• Voluntary Certification:
  While not a legal requirement, the GS mark is highly recognized and respected by consumers, signifying a commitment to safety.
  

• Independent Testing:
  A GS mark is only awarded after a product has been tested and certified by an independent, state-approved testing organization.
  
  

• Safety Standards:
  The GS mark signifies compliance with German and, where applicable, European safety standards.
  

• Broader Scope than CE:
  The GS mark often requires a higher level of testing and safety standards than the CE marking

 

[TrampledByEwoks]

Thanks for all this!

 

[W31Olds]

Trampled, whatever you decide to go with the connect has to be compatible. There are lot of different sizes out there.

 

[Josh Will]

They sell the power supply on eBay: https://www.ebay.com/itm/141485674913

 

[Oliver@DSunY]

Thanks for all this!

Have you replace the power?
it is not so easy. I strongly suggest replace it by orginal power. I can help you. very simple.

 

[Oliver@DSunY]

from the up pictures , I do not think they are good suggetion.

let me explain.
1, the power should be :
AD to DC power, 90W , 24V 4A, the wave is less than 8%
2, to connect the light, slot is 2.5cm , 3 meter DC .
3, some power show 90W , 24V 4A, but when run 10hours, it is very hot.